Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Apr 2009
Posts: 194
Member
OP Offline
Member
Joined: Apr 2009
Posts: 194
Just bought from my authorized Avaya dealer and installed Brand New IP Office IP 500 V2 with 9.0 essentials. The only card installed is IP500 V2 ATM V2.

It has 6 digital ports, and 4 regular C.O. ports. I am using new 9508 sets. All equipment is new.

Set up auto attendant greeting in group 200. Greeting has two selector code choices.
Press 3 to leave a message, and press 4 to be connected to a doctor right away. Selector code 4 will then seize C.O. line and call doctor's cell phone.

The problem is, once caller presses 4, this forces IP office into a cold restart ( reboot)??

Anybody experience this type of behavior before?

Thank you
Brand new IP Office doing cold start during selector code selection


Telesystems technician
Atcom VoIP Demo
VoIP Demo
Joined: May 2002
Posts: 4,238
Likes: 5
Moderator-Avaya, Polycom
*****
Offline
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,238
Likes: 5
Is it just when you press 4

And did you default the system before programming it .

Joined: Apr 2009
Posts: 194
Member
OP Offline
Member
Joined: Apr 2009
Posts: 194
Seems only when press 4 cuz all other selector codes except three are not enabled.
I believe my programmer defaulted it. I will ask him.


Telesystems technician
Joined: Apr 2009
Posts: 194
Member
OP Offline
Member
Joined: Apr 2009
Posts: 194
Remember the system should not go into cold restart everytime a caller presses 4.


Telesystems technician
Joined: May 2002
Posts: 4,238
Likes: 5
Moderator-Avaya, Polycom
*****
Offline
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,238
Likes: 5
I would default it and re-program it.

Joined: May 2004
Posts: 1,633
Likes: 1
Moderator-Avaya
*****
Offline
Moderator-Avaya
*****
Joined: May 2004
Posts: 1,633
Likes: 1
The proper way to deploy a system would have been to follow the docs. (proper, to rebuild SD card at current firmware before powering up the IP500, implanting the proper release on the system.)

By NOT following the docs, you have installed a brand new system, at out of date (not supported) firmware.

Now that you have a bug, you cant get support on the release you are on.

As well, Avaya does not support that partner selling you equipment for you to resell. By doing so, you have done nothing wrong, but they could be de-authorized as they have violated their partner agreement. Which, also, makes that system you sold, grey market.

So now you have a grey market, out of support box.

Your only recourse is to upgrade the box to a current release (9.1 or 10.1) by purchasing a new upgrade license.

Good luck

Joined: May 2002
Posts: 4,238
Likes: 5
Moderator-Avaya, Polycom
*****
Offline
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,238
Likes: 5
Avaya just seems to make them selves harder to do business with.

Joined: May 2004
Posts: 1,633
Likes: 1
Moderator-Avaya
*****
Offline
Moderator-Avaya
*****
Joined: May 2004
Posts: 1,633
Likes: 1
Which part? The engineers understanding the proper installation? Or Avaya not allowing multi tiered distribution?

If you disagree with the latter, we can point to the original topic of this post. An authorized, certified partner, sells an IPO to someone. That someone lacks teh technical aptitude to properly implement the solution. Now, this will cause poor customer satisfaction, both from the customer (the original poster) as well as teh intended customer (who they plan to resell to).

Don't get me wrong, Avaya processes are the reason partners hate them. but in an instance like this, Avaya is trying to protect business partners as well as teh integrity of the product itself.

Joined: May 2002
Posts: 4,238
Likes: 5
Moderator-Avaya, Polycom
*****
Offline
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,238
Likes: 5
On this issue, I completely agree. One should be trained and certified to install and program the IP Office.

Non quantified techs is part of the reason Avaya has a bad name in SMB.
Certified and train techs do the install and maintenance correctly the 1st time.

We are on the same page, on this issue.

Joined: May 2004
Posts: 1,633
Likes: 1
Moderator-Avaya
*****
Offline
Moderator-Avaya
*****
Joined: May 2004
Posts: 1,633
Likes: 1
thumbsup

Page 1 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,830
Posts636,772
Members49,645
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Florencio, HtownDan, Kerry2362, Lorena Catalan, SWB, telecom5000, Tex Tel Marine
Newest Members
Marjan Shaw, KoolBreeze, PhoneGuy827, julesm, Helen.D
49,645 Registered Users
Top Posters(30 Days)
ramo 12
pvj 11
Toner 9
Who's Online Now
1 members (barster), 138 guests, and 22 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5