|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
Greetings,
My spare 7030 that was 4.82 after a power failure now just blinks v2.2 on the phones. I understand that there is an sio cable recovery procedure like there was for 4.60 to bring it to 4.93. Does anybody happen to have a copy of the sio procedure? I have the OSDM procedure for recovery but I can't get there.
TIA,
John 807
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 5
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 5 |
|
|
|
|
|
Joined: Dec 2017
Posts: 1
Member
|
|
Member
Joined: Dec 2017
Posts: 1 |
I have this problem in office serv 7030 please ineed the solution of this problem
|
|
|
|
|
Joined: Aug 2007
Posts: 25
Member
|
|
Member
Joined: Aug 2007
Posts: 25 |
If you google "How to Recover the OS7030" you'll find the pdf tech bulletin, I've restored a couple of them using the doc
|
|
|
|
|
Joined: Dec 2017
Posts: 10
Member
|
|
Member
Joined: Dec 2017
Posts: 10 |
When i run the teraterm software and try to hit q it keeps booting and will not go to the samsung prompt like the samsung builtin
|
|
|
|
|
Joined: Dec 2017
Posts: 10
Member
|
|
Member
Joined: Dec 2017
Posts: 10 |
doing the samething in hyper terminal will not let me quit when 7030 booting
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 5
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 5 |
Maybe you didn't make the cable right?Hard to tell
|
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
I use a Cisco console cable to connect to my laptop. The homemade cable I have is a female rj 45B wh/bl to pin 1 bl/wh to pin 2 and wh/or going to pin 3 and that works fine unless I inadvertently plug the 3 prong in backwards to the 7030.
I hope this helps,
John 807
|
|
|
|
|
Joined: Jan 2018
Posts: 8
Member
|
|
Member
Joined: Jan 2018
Posts: 8 |
Hello,
Thank you for helping me because I made q with pc keyboard on hyperterminal to stop the boot without any reaction, it continues the boot.
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 5
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 5 |
No need to post the same thing in 2 different threads. Test the cable you made by looping the tx to the rx .Whatever you type should appear on the screen.
|
|
|
|
Forums84
Topics93,879
Posts636,998
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
14
guests, and
17
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
