|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
Customer has a Norstar MICS with two T7406E cordless phones. These are bad, and I haven't had good luck with replacements. I'd like to replace them with a couple of ATA's and some off the shelf cordless phones. I don't want the type that has one base and three handhelds. I want a separate cordless phone on each ATA. Would I run into problems with two cordless phone bases in close proximity to each other?
Thanks. Jim
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
You need to ask the manufacturer of the model you want for those questions....nothing to do with the KSU or the ATA's.
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
You should look for cordless phones that you can set on different channels with a security code (dip-switch, etc). That way they "should" not interfere with each other.
I think DECT phones might have that
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
Member
Joined: Jan 2007
Posts: 1,014 |
Jim, Just remember if you go the ATA route you will lose caller ID and easy feature access on those sets. I'm only mentioning it because I know of a client who went from 7406's and SpectraLinks to EnGenius long range sets and those two things became major issues. Thanks
John 807
|
|
|
|
Joined: Dec 2007
Posts: 386
Member
|
Member
Joined: Dec 2007
Posts: 386 |
VTech offers a CS6619 Dect 6.0 phone that we have used often. Numerous times we have had two base units sitting close to each other with no issues. Inexpensive.
Rick
BTS
|
|
|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
I installed a couple of that model 2 weeks ago Rick, and they seem to be doing ok. Thanks.
Jim
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, hitechcomm),
142
guests, and
241
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|