web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Bushmills #616861 02/21/18 07:47 PM
Joined: Aug 2011
Posts: 344
Member
OP Offline
Member
Joined: Aug 2011
Posts: 344
This is what the Folks on the other side are seeing:

'' failed for '184.69.23.198:5060' (callid: 4556ac0-c0a801e4-13c4-50022-99efd-78d6eb18-99efd) - No matching endpoint found
[Feb 21 15:23:19] NOTICE[16185]: res_pjsip/pjsip_distributor.c:649 log_failed_request: Request 'INVITE' from '' failed for '184.69.23.198:5060' (callid: 4556ac0-c0a801e4-13c4-50022-99efd-78d6eb18-99efd) - Failed to authenticate

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Bushmills #616863 02/21/18 08:29 PM
Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
The NLCR and LCR is what i mean by similar to SPNET. But if you don't need to dial the extension directly from a handset you don't need to worry about it, as mobex has a TG and outgoing digits fields so you can put 805 12345#

Bushmills #616864 02/21/18 08:30 PM
Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
Your issue with the sip it the proxy domain name field.

Ask them what their realm is, then set that as the proxy domain name in the sip settings

Bushmills #616925 02/23/18 12:32 PM
Joined: Aug 2011
Posts: 344
Member
OP Offline
Member
Joined: Aug 2011
Posts: 344
They managed to get it to work with settings on their end without me changing the domain. The outside destination has an auto attendant, so I set a station group that overflows to another station group with a virtual SLT that is mobex paired to the sip trunk destination. That seems to do the trick.

I think we have it sorted.


Bushmills #617012 02/26/18 05:51 PM
Joined: Aug 2011
Posts: 344
Member
OP Offline
Member
Joined: Aug 2011
Posts: 344
Ok, next challenge with this on if you are still up for helping.

They have a second system connected through SPNet to the main system where the sip trunks are configured. Is there a way I can use the sip trunk on the other system? I tried allowing them to just dial the virtual, but it didn't do the external forward. I also tried to set up tandem trunking but that didn't work either.

Any suggestions?

-B

Bushmills #617070 02/28/18 01:44 AM
Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
Setup the sip trunk extension number that's being dialled from the main site just like you would a standard extension via SPNET.

Basically you're doing call hop off to the sip trunks.

A user on site 2 dials the sip number, call goes to site 1 via spnet, then out from site 1 via sip.

Bushmills #617271 03/05/18 07:41 PM
Joined: Aug 2011
Posts: 344
Member
OP Offline
Member
Joined: Aug 2011
Posts: 344
So let me see if I'm following, We want be able to have the remote site dial through to 85015520 where 8501 is the dedicated sip trunk and 5520 is the number to be called on that line.
sip trunk is on node 1
So, on node 2 I set 85 in the NLCR, translate that to 00185 with a wait length of 8 (8501 +5520) max digit 11 (node001 + trunk8501 + extension5220
then set routing digits 00185 with length 11 and route it through the SPNet LCR table

Does that seem right?

-W

Bushmills #617274 03/05/18 08:52 PM
Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
Not quite.

The remote site dials 5520, so set that up in the NLCR like you would for any other extension.

The main site will need the required entries in the DID table as per normal SPNET, the main site will handle the "hop off" from the SPNET trunks to the SIP trunks via it's LCR routing.

This assumes you've setup 5520 like a SPNET extension on the main site using NLCR but then sending via SIP not SPNET.

If you send me DB's I can tell you what to program where

Bushmills #618042 03/20/18 08:20 PM
Joined: Aug 2011
Posts: 344
Member
OP Offline
Member
Joined: Aug 2011
Posts: 344
Thanks for the Help Nameless. This one is on the back burner for a bit.

Cheers,

Page 2 of 2 1 2

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,710 CTX100 install
186,795 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
pvj 4
jc2it 4
Who's Online Now
1 members (justbill), 211 guests, and 241 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5