|
Joined: Mar 2018
Posts: 2
Member
|
OP
Member
Joined: Mar 2018
Posts: 2 |
Hello guys,
I'm new to the forum, but pretty desperate for a solution. Let me explain the problem in the shortest way possible:
I have this NS 500 PBX, installed by someone I don't know in the office.
All calls to all three numbers on the analog line (LCOT6) ring on Extension 8. I have no idea why.
8 is not in any ICD group and is not set in the DIL table, but it rings.
I need one of the numbers to redirect to Extension 100, I can't figure it out, I can't access the MSN table also, I get error E00030A: Operation was cancelled. Please set appropriate setting.
Thanks in advance, if someone can get me out of this mess, I'm willing to do a donation if I have to, I'm that desperate.
Thank you all!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2007
Posts: 2,116 Likes: 2
Admin
|
Admin
Joined: Jan 2007
Posts: 2,116 Likes: 2 |
Msn is ISDN feature so you won’t get that.
What is set in dil to ring for each line ?
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Joined: Mar 2018
Posts: 2
Member
|
OP
Member
Joined: Mar 2018
Posts: 2 |
Hello OBT, I just went to the PBX myself, It turned out to be an ISDN line, put in the BRI port, 1 slot. (oops) BRI2 does not have a cable in it for the initial test. I switched the DIL Distribution Method to MSN now. I am adding a few screenshots with the settings hoping to make it easier. DIL https://www.dropbox.com/s/97qqpv9pm4as6nr/Screenshot%202018-03-19%2000.25.04.png?dl=0MSN table https://www.dropbox.com/s/r0ujtxmjx1c1mts/Screenshot%202018-03-19%2000.24.54.png?dl=0Problems so far: 1. With one cable it's not ringing at all. 2. When there's also a cable in BRI2, it rings for a minute, but once you drop the first call and call again, you get busy signal. 3. At the moment, I have the full numbers in the MSN table, I wish one of them to rung on extension 8 and the other to extension 100, any ideas? Really weird. Thanks in advance for the tips anyone and especially OBT, seriously will send some cash if you guys can help me figure it out, I spent too much time on it.
|
|
|
|
Joined: Jan 2007
Posts: 2,116 Likes: 2
Admin
|
Admin
Joined: Jan 2007
Posts: 2,116 Likes: 2 |
First of all do you have Isdn lines?
Second I would use ddi and the number that come in may not be the full number
Run a trace on the isdn to see what is coming in
If you want to get in to move details pm me as it is not allowed to give detailed instructions on the open forum
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
Forums84
Topics94,262
Posts638,693
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
102
guests, and
243
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|