|
|
Joined: Apr 2007
Posts: 610 Likes: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 610 Likes: 1 |
Hi, Customer with 7200S purchased call accounting software which was downloaded remotely. In Lan Printer settings I cannot get Current Status to show PC after Lan update. I can send smdr data to the printer OK. ( I setup the same for another customer a couple of weeks ago and was pretty simple) not sure what I am missing. I see that SMDR uses port 5100. Is it possibly blocked? If the Printer Destination is set to PC then should the printer IP be the IP address of the PC instead of the printer? (network is part of a large hospital) Thanks all.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Put the ip address of the pc in the management ip whitelist.
It will only show pc when the pc is connected to the system
You can try it by telnetting to port 5100
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
1 members (James D.),
82
guests, and
304
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|