|
Joined: Jun 2004
Posts: 310
Member
|
OP
Member
Joined: Jun 2004
Posts: 310 |
Brand new 7100 V 4.95
Call into Day or Night or Holiday Menu Dial Ext e.g. 205 VM says transferring to Ext 205, which it is. Ext rings, no answer Goes to VM Day Menu instead of MBX Happens on all ext
All menus and mode settings seem correct For the life of me, I can't see where anything is mis-programmed
Help ?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
I assume the mailboxes work correctly?Say you VT a caller to a mailbox,does that work?
|
|
|
|
Joined: Jun 2004
Posts: 310
Member
|
OP
Member
Joined: Jun 2004
Posts: 310 |
Haven't tried that and I'm not on site
If I direct a ring group overflow to vm and set up fwd trk / sta so a call to the ring group goes to a mailbox, it works.
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
If you have remote access remove the ???EXT from the main menu so it won't try the extension and go direct to the mailboxes and see if that works.
|
|
|
|
Joined: Jun 2004
Posts: 310
Member
|
OP
Member
Joined: Jun 2004
Posts: 310 |
Then I couldn't dial an ext from outside Gets me to VM but wouldn't be working properly
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
I understand that I wanted to see if that works ok ,no as a permanent solution.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
What does the port activity screen show? Or look at the activity log, the reason why it went to day main will slow there
|
|
|
|
Joined: Nov 2013
Posts: 57 Likes: 1
Member
|
Member
Joined: Nov 2013
Posts: 57 Likes: 1 |
Assume you setup your mailbox correctly. I would look at the activity log. Check if the call went to call BLOCKED then bump the call to Day Main. If that is the case, goto x205 > call director > BLOCKED set action to 'Goto', type to 'Mbx", and target to "Mbx205". Then make another test call.
|
|
|
|
Joined: Jun 2004
Posts: 310
Member
|
OP
Member
Joined: Jun 2004
Posts: 310 |
Found that it was a case of MMC 741 SVMi Create Subscriber not being set up Set proper extensions to both, BINGO Everything started working properly
This defies my understanding of how the SVMi works But I'll take it.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
MMC741 will always take precedence over manually created mailboxes/extensions.
But only when the vm restarts (either due to power cycle, or it's maintenance)
So if you have manually created a MBX/EXT but have it set to no in MMC741 then when the vm next restarts it will delete the MBX/EXT
|
|
|
Forums84
Topics94,287
Posts638,784
Members49,766
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
162
guests, and
172
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|