|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
MICS XC7.0 with lots of expansion cabinets for lines and stations.
I need to swap out an LSDS card in one of the M12X0 cabinets. Do I have to power down everything, or just the M12X0 cabinet for the swap?
Thanks. Jim
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
|
|
|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
That puts my mind at rest a little bit. I'm worried about loosing programming if I power cycle the ksu. Never was able to get a good backup out of it.
Thanks.
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
I take it one step further.
I go into maintenance and disable that module BEFORE I power it down. Swap the card. Power up. Then enable that module.
It may work the other way. I just feel this is one step SAFER way.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|