Phone Systems


Previous Thread
Next Thread
Print Thread
Rate This Thread
Page 2 of 2 1 2
#627970 - 03/05/19 09:12 PM Re: SX 200 Transfer ? [Re: teleco]  
Joined: Sep 2008
Posts: 389
Steve Layton Offline
Member
Steve Layton  Offline
Member

Joined: Sep 2008
Posts: 389
Scappoose,OR
The cable to the modem has to be a null and the Baud for the serial ports need to be set to 9600.

Mitel search for systems, cards, phones, software, manuals and repairs!
Mitel Equipment Search
Mitel Superset 4025 $35
#627979 - 03/06/19 01:27 PM Re: SX 200 Transfer ? [Re: teleco]  
Joined: Nov 2001
Posts: 376
teleco Offline
Member
teleco  Offline
Member

Joined: Nov 2001
Posts: 376
Baldwinsville,NY
Yes I have, enough to get me in trouble. Is there a doc that shows the pin outs? My old laptop and cables got ripped, I'm on site, dialing into the modem to connect, I am connecting to the switch but not able to bring up the menu.

#627983 - 03/06/19 04:39 PM Re: SX 200 Transfer ? [Re: teleco]  
Joined: May 2005
Posts: 978
westerntelephone Offline
Member
westerntelephone  Offline
Member

Joined: May 2005
Posts: 978
Idaho Falls, Idaho USA
If you're on-site, why not just use the console to program? How are you connecting to the switch through the modem if you're not using a PC?

#627984 - 03/06/19 05:12 PM Re: SX 200 Transfer ? [Re: teleco]  
Joined: May 2005
Posts: 978
westerntelephone Offline
Member
westerntelephone  Offline
Member

Joined: May 2005
Posts: 978
Idaho Falls, Idaho USA
The cable to the modem has to be a null and the Baud for the serial ports need to be set to 9600.

No, the cable from the switch to the modem is straight through. 2-2, 3-3, 5-7. The cable to program the modem is a null modem cable.

#628928 - 04/08/19 01:35 PM Re: SX 200 Transfer ? [Re: teleco]  
Joined: Nov 2001
Posts: 376
teleco Offline
Member
teleco  Offline
Member

Joined: Nov 2001
Posts: 376
Baldwinsville,NY
I finally got in. Now that I am I don't understand the device interconnection table entry. Also what are the ranges for index numbers in form 31? Thanks..

#628935 - 04/08/19 05:05 PM Re: SX 200 Transfer ? [Re: teleco]  
Joined: May 2005
Posts: 978
westerntelephone Offline
Member
westerntelephone  Offline
Member

Joined: May 2005
Posts: 978
Idaho Falls, Idaho USA
Going to "Review" in form 31 will show you devices.

#629165 - 04/17/19 11:41 AM Re: SX 200 Transfer ? [Re: teleco]  
Joined: Nov 2001
Posts: 376
teleco Offline
Member
teleco  Offline
Member

Joined: Nov 2001
Posts: 376
Baldwinsville,NY
I"m sorry but I don"t understand what to do with form 30. Under review I see 01 sta/sets ,02 console, 03 loopstart, and a bunch of undefined. I have all he other forms programmed. How do I call forward a station to a speed dial bin?

#629201 - 04/17/19 11:24 PM Re: SX 200 Transfer ? [Re: teleco]  
Joined: May 2005
Posts: 978
westerntelephone Offline
Member
westerntelephone  Offline
Member

Joined: May 2005
Posts: 978
Idaho Falls, Idaho USA
So form 30 just allows or disallows different connections between devices.
01-Stations/Sets
02-Console
03-Loop Start Trunks
04-Ground start trunks
05-DID/Tie Trunks
06-E&M Trunks
Its's a grid. Where 1 intersects 2 there should be an * asterisk. There should be asterisks from 01- all the way across. That just means Stations can connect to anything. But that's not important. Only 1 through 6, 2 through 6, 3 through 6, 4 through 6, 5 through 6, 6 through 6. All intersecting points should have an asterisk *. That's important to allow trunks to connect to each other on a call transferred off-site.
Now, assign in form 31, a speed dial bin with the number in the bin. Let's just use speed dial bin 20 as an example. Chose insert, 20, the speed call, then enter the number in the number field, including the "9".
Go to form 09 and choose your extension you want to be forwarding off-site. Choose "more", review, Call Fwd. Enter always, speed dial 20. Should work if you have already allowed trunk to trunk transfer and abbreviated dial access to all pertinent classes of services for trunks, console, and stations. Good Luck!

#629236 - 04/18/19 09:38 PM Re: SX 200 Transfer ? [Re: teleco]  
Joined: Nov 2001
Posts: 376
teleco Offline
Member
teleco  Offline
Member

Joined: Nov 2001
Posts: 376
Baldwinsville,NY
Thanks you so much, westerntelephone, for your patience. Finally got it to work.

#629257 - 04/19/19 02:18 PM Re: SX 200 Transfer ? [Re: teleco]  
Joined: May 2005
Posts: 978
westerntelephone Offline
Member
westerntelephone  Offline
Member

Joined: May 2005
Posts: 978
Idaho Falls, Idaho USA
Good to hear!!!

Page 2 of 2 1 2

Moderated by  DrPbx 

Refurbished Phones & Equipment Search
Shout Box
Most Recent 5 Post
2682a Call Director Help Needed
by morephones. 07/19/19 02:40 AM
NS700
by phonman123. 07/19/19 12:14 AM
NTP
by mfecko. 07/18/19 08:35 PM
SV9100 Voice mail to email level
by Derm J. 07/18/19 05:50 PM
Network Emanager
by Jared R. 07/18/19 03:40 PM
Who's Online Now
42 registered members (thill, vicbob, BTS01, ALB300, RNA, JBean3329, BobRobert, sonny88, gelehu, BforBENDETTA, 1864, High Mesa Communications, Professor Shadow, nfcphoneman, mike b, Yoda, Touch Tone Tommy, hbiss, Gregco Supply In, crazy canuck, barnito, Keyset6, morephones, gauda1, aswipay, jknichols, pvj, jab1780, mfecko, justbill, upstateny, dexman, MooreTel, C5Z, metelcom, phonman123, tatenda, nameless, newtecky, RedBul, Bob3470, Greg Ercolano), 687 guests, and 780 spiders.
Key: Admin, Global Mod, Mod
Tech Support Line 1.800.766.3425
Over the Phone Tech Support for your Phones and Business Phone Systems
Popular Topics(Views)
Newest Members
gauda1, Gregco Supply In, g6270r, dabcom, carjean
49071 Registered Users
Forum Statistics
Forums62
Topics92,648
Posts630,275
Members49,071
Most Online5,661
May 23rd, 2018
Today's Birthdays
dbolduc, DelRossi, fkenney719, micheled, MITELPHONEGUY, SacramentoChad, Velcro
Top Posters(30 Days)
dexman 31
C5Z 15
Daniel 12
hbiss 10
RESPONSIVE WEBSITE DEVELOPMENT
Free Phone Repair Diagnostic
EMP & Lightning Home Surge Protection
EMP - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2019
Trusted Partners
Sitemap