|
|
Joined: Mar 2019
Posts: 1
Member
|
OP
Member
Joined: Mar 2019
Posts: 1 |
Hello all, I have an IPO in basic Partner mode with 4 digital cordless phones installed, 3810's. Problem is only 2 programmable buttons.(2 are intercoms). I have 4 CO lines, so no call appearances on all buttons of course. I put a call on hold, but have no way of going back to retrieve the call. All I can do is inbound/outbound calls, intercom, page, transfer,etc.. warehouse users of these phones would like to take a call, make a page announce of holding on a certain line.. what the heck?
|
|
|
|
Joined: May 2004
Posts: 1,663 Likes: 4
Moderator-Avaya
|
Moderator-Avaya
Joined: May 2004
Posts: 1,663 Likes: 4 |
So, you did not read info on the phone? With a 4 button phone, how did you think you would put 4 trunks and an intercom button on it?
I guess your only option is to lose the 4th trunk on that phone.
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Carl Navarro),
145
guests, and
348
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|