Phone Systems


Previous Thread
Next Thread
Print Thread
Rate This Thread
#628994 - 04/10/19 02:45 PM BCM 450 R6 - Calls to 911  
Joined: Oct 2006
Posts: 1,178
Yoda Online content
Member
Yoda  Online Content
Member

Joined: Oct 2006
Posts: 1,178
Northeast Iowa
Another question on this BCM 450 R6. Service is a PRI from the telco. The customer has received reports that occasionally there are calls to 911 that show as coming from one of the DID numbers on this system. Maybe once every couple of weeks. I’ve looked at the target lines for the DID to see which DN is assigned. There is no one at that DN at the time the call was made.

Also, for the last year or so, one phone on the BCM receives calls from an analog extension on the same system. The receiving phone shows that ext xxx called. Maybe related, or not?

Ever heard of a BCM doing a random call? Especially to 911?

Thanks.
Jim

Google Telephone Equipment Search
#628995 - 04/10/19 02:56 PM Re: BCM 450 R6 - Calls to 911 [Re: Yoda]  
Joined: Apr 2005
Posts: 2,267
dans Offline
Member
dans  Offline
Member
*****

Joined: Apr 2005
Posts: 2,267
St. Louis, Mo 63025
Jim,
Are you 100 percent sure the DID in question belongs to your customer?


We get old too soon, smart too late
#629005 - 04/10/19 06:31 PM Re: BCM 450 R6 - Calls to 911 [Re: dans]  
Joined: Oct 2006
Posts: 1,178
Yoda Online content
Member
Yoda  Online Content
Member

Joined: Oct 2006
Posts: 1,178
Northeast Iowa
I saw the email from the 911 center with the call detail pasted into the email. The number is definitely in my customer's block of numbers.

#629007 - 04/10/19 06:39 PM Re: BCM 450 R6 - Calls to 911 [Re: Yoda]  
Joined: Feb 2005
Posts: 1,544
Curlycord Offline
Member
Curlycord  Offline

Member

Joined: Feb 2005
Posts: 1,544
Toronto, Canada
It's not a matter of whom has the DID assigned to their set but rather whom has their OLI programmed with that DID #.
So check every OLI setting for every set.

Analog station issue, possibly related...check it's OLI too as well if there is something connected to that ports and if it has a hotline programmed on it.

The old trick for analog cordless working with a deskset was to revers the DN's since Answer DN does not work on an ATA.
You would have the cordless as the main DN and put an answer key for the cordless on the desk set , then program OLI on both the ATA and Digital DN's


=---()))))))))---=
www.curlycord.com
[Linked Image]
Toronto, Canada




#629008 - 04/10/19 07:38 PM Re: BCM 450 R6 - Calls to 911 [Re: Yoda]  
Joined: Dec 2003
Posts: 2,005
NTlayoff Offline
Moderator-Nortel
NTlayoff  Offline
Moderator-Nortel

Joined: Dec 2003
Posts: 2,005
Columbus, Ohio, USA
Yoda:

Your post reminds me of one service call I had.years ago.
It is not exactly the same identical issue - but I think it is close enough to mention this.

I had an analog phone on a system, and weird things were happening when a call came in..

It took a bit of troubleshooting but what I found was the wall jack for the analog phone was bad.
It was in a dirty environment and the jack was dirty.
It was intermittently shorting with all that dirt and when that happened it showed busy and because of programming it would
forward calls coming in to some phone.that should not be getting incoming calls.

I replaced the jack and it fixed the problem.

Shorting the jack acts like it is off hook and with properly timed shorts maybe it is dialing 911 or the other extension.
I have never played/tested a jack by shorting the pins to see if it would dial.
But in the old days I could dial a phone if the dialer was bad or disabled by quick flash hooks.

Just a thought..


If CON is the opposite of PRO
Then what is the opposite of Progress?
#629030 - 04/11/19 06:12 PM Re: BCM 450 R6 - Calls to 911 [Re: Yoda]  
Joined: Mar 2018
Posts: 172
Daniel Offline
Member
Daniel  Offline
Member

Joined: Mar 2018
Posts: 172
St Louis, MO
It might also be possible that someone else in the world is masking their outbound caller id as one in the block that you have. You might want to do an SMDR capture just to be sure that the 911 call is actually happening from your system.


The Cloud is just someone else's computer!

Moderated by  MooreTel, NTlayoff, Z-man 

Refurbished Phones & Equipment Search
Shout Box
FREE DESI Labeling System Software!
FREE DESI Labeling Software - Click Here!
Most Recent 5 Post
Hey Guys, Saying hello to all of you.
by ChevyFanAttic. 06/17/19 05:40 AM
need help with some remote programming
by ChevyFanAttic. 06/17/19 05:26 AM
Green Acres
by John807. 06/15/19 02:08 AM
WIN 100D
by mfecko. 06/14/19 07:11 PM
DK SUB40 CID Question
by Duane F.. 06/14/19 04:20 PM
Who's Online Now
24 registered members (ChrisNI, ChevyFanAttic, ChrisRR, 1864, Professor Shadow, justbill, hbiss, michaelg, jknichols, jeffmoss26, newtecky, BobRobert, Bob3470, mdaniel, gelehu, Yoda, Noobed2336, Mercenary Roadie, Tip&Ring, OBT, nfcphoneman, nonameyet, JWRacedog, Memphisribs), 327 guests, and 765 spiders.
Key: Admin, Global Mod, Mod
Tech Support Line 1.800.766.3425
Over the Phone Tech Support for your Phones and Business Phone Systems
Popular Topics(Views)
Newest Members
ChevyFanAttic, Starblazer, Alucio, Curt Davis, LewisIzabella
49042 Registered Users
Forum Statistics
Forums62
Topics92,537
Posts629,547
Members49,042
Most Online5,661
May 23rd, 2018
Today's Birthdays
Ashemha, CSS_ETS01, Herk, Jim Baldwin, Kamakzie1976, Phonewizard, robertk
Top Posters(30 Days)
dexman 37
Daniel 17
C5Z 16
RESPONSIVE WEBSITE DEVELOPMENT
Free Phone Repair Diagnostic
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2019
Trusted Partners
Sitemap