| | Joined: Feb 2010 Posts: 381 Member | OP  Member Joined: Feb 2010 Posts: 381 | Door phone/camera is working when you press the button it calls extensions we are just trying to figure out how to open the door by pressing a digit on the phone if this is even possible I was thinking that I could install a PDGU
Just for the relay portion of it
Hi I’m just wondering what I need to do in order to use the door Access
I think I know what to do I’ve been thinking about this for a while now
Thanks | | | | | Joined: Apr 2005 Posts: 2,410 Member | | Member Joined: Apr 2005 Posts: 2,410 |
We get old too soon, smart too late
| | | | | Joined: Sep 2004 Posts: 3,967 Member | | Member Joined: Sep 2004 Posts: 3,967 | What's the telephone interface SIP?
| | | | | Joined: Feb 2010 Posts: 381 Member | | OP Member Joined: Feb 2010 Posts: 381 | SV9100 all IP Phones and door box has SIP Interface | | | | | Joined: Sep 2004 Posts: 3,967 Member | | Member Joined: Sep 2004 Posts: 3,967 | Ya, it should work with NEC. You will need to do some programming to enable RFC/DTMF to work. I have used these devices (another brand) but it's all the same. They connect and them dial a digit to open a gate. One spot is you have to enable the DTMF/RFC and then enable the extension to press/receive DTMF after call is established.
| | | |
22 members (Curlycord, dexman, nfcphoneman, BobRobert, sketchypro, metelcom, MooreTel, FixYaBrokeStuff, Skunky, nortelvoip, pvj, morephones, justbill, Professor Shadow, Carl Navarro, hbiss, sundance, RATHER BE FISHING, jeffmoss26, Keyset6, Andyreed, telecom guy10),
221
guests, and
35
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums94 Topics94,195 Posts638,624 Members49,402 | | Most Online5,661
May 23rd, 2018 | | |
|
