Phone Systems


Previous Thread
Next Thread
Print Thread
Rate Thread
Nitsuko dx2e-24m - Help needed.. #630873 07/02/19 10:14 AM
Joined: Jul 2019
Posts: 2
veniplex Offline OP
Member
OP Offline
Member
Joined: Jul 2019
Posts: 2

Hi all,

during my long intensive search for information about the nitsuko dx2e-24m telephone system, I came across this forum. It looks like you are my last hope.
I work part-time in a small auto repair shop using the nitsuko dx2e-24m. Unfortunately this system (as you can imagine) is already very old (probably older than me). I find absolutely no useful information.
The problem is the following: We've had an ISDN connection so far, via which internet, telephony and fax were connected. Now we have switched to a DSL connection with 100 Mbit/s at Vodafone. Unfortunately our fax machine doesn't work anymore.
I strongly assume that the system simply can't do anything with the T.38 protocol (fax via VoIP). Our solution will probably be a Fritz!Box 7590.

Nevertheless I would like to understand the system and be able to configure it. After everything I have found so far, the system can be configured via a connected telephone. Can you help me here? How exactly can this be done? I am 23 years old and my first and only contact with telephone systems was with an Alcatel PBX, which can already be configured via software smile.....

MUCH THANKS in advance!

Greetings
Sascha

Tie - Nitsuko Telephones and Equipment
Re: Nitsuko dx2e-24m - Help needed.. [Re: veniplex] #630874 07/02/19 02:29 PM
Joined: Dec 2007
Posts: 6,155
Professor Shadow Online Thinking
Admin
*****
Online Thinking
Admin
*****
Joined: Dec 2007
Posts: 6,155
I am not 100% sure but it may be close to the Nitsuko 28i (of the i-Series).

Here is a link to the Installation/Hardeware Manual.

and here is a link to the Software Manual.

and of course the User Guide

Be forewarned: A total understanding of the programming is REQUIRED! A simple software change in one programming and effect a multitude of other seemingly unrelated programs and can be a major headache trouble shooting.

Best to find a Authorized Dealer and/or Certified Technician. It's better to pay a few Euro's now than have a Brick and pay much more Euros later!

Perhaps someone more familiar with the TIE/Nitsuko/NEC product line will correct me if I am in error.



Dean
Photographs:
https://www.instagram.com/deanwilsoncanby/
https://fstoppers.com/profile/deanwilsoncanby

Please don't confuse your "Internet Search" with my licenses, certifications and 30 years experience.

"Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."
Re: Nitsuko dx2e-24m - Help needed.. [Re: Professor Shadow] #630897 07/03/19 09:24 AM
Joined: Jul 2019
Posts: 2
veniplex Offline OP
Member
OP Offline
Member
Joined: Jul 2019
Posts: 2
Originally Posted by Professor Shadow
I am not 100% sure but it may be close to the Nitsuko 28i (of the i-Series).

Here is a link to the Installation/Hardeware Manual.

and here is a link to the Software Manual.

and of course the User Guide

Be forewarned: A total understanding of the programming is REQUIRED! A simple software change in one programming and effect a multitude of other seemingly unrelated programs and can be a major headache trouble shooting.

Best to find a Authorized Dealer and/or Certified Technician. It's better to pay a few Euro's now than have a Brick and pay much more Euros later!

Perhaps someone more familiar with the TIE/Nitsuko/NEC product line will correct me if I am in error.



Hello Professor Shadow,

thank you very much for this quick reply! smile
I have a look at the documents. But I agree with you, it will probably be best to consult an external expert.

Thanks again!

For further assistance, opinions etc. I am of course also very grateful!

Greetings
Sascha


Re: Nitsuko dx2e-24m - Help needed.. [Re: veniplex] #631093 07/12/19 03:30 PM
Joined: Jun 2004
Posts: 1,316
B
BillFlippen Offline
Member
*****
Offline
Member
*****
B
Joined: Jun 2004
Posts: 1,316
I would first start by connecting the fax directly to the lines. There is a lot of back end stuff that telco need to do to ensure faxes go through.
the phone system should not play a factor unless there is a defective port.

I just fought with Century Link for a month on this very issue. they delivered lines via IP to Analog. however they didn't adjust the QoS allow priority to VOIP. Also you may want to turn off ECM on the fax machine and lower the baud rate




TouchPoint Networks.

Serving the Northwest Since 1991
NEC Shoretel Zultys T3 Tadiran

Moderated by  JWRacedog, skip555 

ShoutChat Box
Comment Guidelines: Do post respectful and insightful comments. Don't flame, hate, spam.
Most Recent 5 Post
IP Office Basic /Standard Mode.
by Rickman - 11/15/19 02:30 PM
low volume on 302C console
by Bogaard - 11/14/19 09:07 PM
SV8300 have to dial 9 on 911 call
by mreilly - 11/14/19 07:33 PM
NEC Aspire Voicemail issue
by jc7001 - 11/14/19 07:05 PM
IP office and remote IP phone
by High Mesa Communications - 11/13/19 12:26 AM
Who's Online Now
41 registered members (Ruben, usedphones, nameless, newtecky, Bob3470, Touch Tone Tommy, mreilly, jknichols, BtekFool, seafort, dans, KRRath, BobRobert, geronimo, Yoda, Rickman, mbhydro, hbiss, justbill, Professor Shadow, www.telcom1.net, Patryk D., BTS01, Paul@IPG, gelehu, jmdavis, nortelvoip, helpifican, JBean3329, R4+Z, vicbob, jab1780, MooreTel, erniejoey, metelcom, Skunky, Carl Navarro, hitechcomm, Carlos#1, RedBul, pvj), 2,941 guests, and 686 spiders.
Key: Admin, Global Mod, Mod
Tech Support Line 1.800.766.3425
Over the Phone Tech Support for your Phones and Business Phone Systems
Popular Topics(Views)
Newest Members
geronimo, bmsjeff, Reese Jacobs, lizhou, BangorUni
49173 Registered Users
Forum Statistics
Forums62
Topics93,031
Posts632,800
Members49,173
Most Online5,661
May 23rd, 2018
Today's Birthdays
3T, biprgriff, mandi, Socrates, TimH64
NEC DX-40 PKG $299
NEC DX-40 PKG $299
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters(30 Days)
dexman 24
RedBul 15
POLYCOM SOUNDPOINT 10 Pack
FREE Voip Phone - Click Here!
50% OFF Most All Phones
FREE Voip Phone - Click Here!
RESPONSIVE WEBSITE DEVELOPMENT
Free Phone Repair Diagnostic
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2019
Trusted Partners
Sitemap