|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
I know this thread is a few weeks old but answers should still help.
3.0 does not have dns programming. It does have default gateway address or "router" address as it is called. You should be able to get the admin program from the ftp site. 3.5 firmware had a bunch of bugs, depending on the revision. I took all my 3.5s to 4.0 if the cpu card was new enough.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2019
Posts: 8
Member
|
OP
Member
Joined: Aug 2019
Posts: 8 |
Hi Derrick,
Thanks. Maybe the issue was no DNS on firmware 3.5 so VOIP did not work. I also could never find a way beside I think with the software (which I did not have) to enter DNS. It was quite the headache because I kept not finding anything wrong and knew it worked with the backup prior.
Most likely I backed up 3.0 firmware / settings and had a failure not at some point upgraded to 3.5 with another box , had the "tech" correct the VOIP and did not create another backup. Then re flashed the 3.5 this time with minus that setting.
|
|
|
Forums84
Topics94,287
Posts638,786
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|