Good morning kind folks, I was wondering if anyone could please tell me if an nortel M3904 would work on my 6x16. The M3904 looks to be a really cool phone, thank you.
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
If I am not mistaken I think you can also use the T series of phones if your software level is high enough. But please someone chime in let me know if that is incorrect.
I have never tried the T-series on the old 6x16. It may or may not work.
But for the T7316e phone - IF (BIG IF) it works it will act like M7310 phone. In other words, only the bottom 5 buttons on left and right can be Line Buttons. But ALL 8 on each side can be anything else.
If CON is the opposite of PRO Then what is the opposite of Progress?
T series will work on all releases with exceptions:
All releases of software: T7316 and T7316e As mentioned the bottom 5 buttons on both rows/sides will simulate an M7310 hence no lines allowed on the top 3 of each row. The red LED light will not act as an MSG indicator
Software prior to 6.1 T7316e -Handsfree button will not work, instead it will be the last key bottom right same as M7310. -Special LCD indicators on the bottom display will not work for the two rows of buttons -The red LED light will not act as an MSG indicator
T series will work on all releases with exceptions:
All releases of software: T7316 and T7316e As mentioned the bottom 5 buttons on both rows/sides will simulate an M7310 hence no lines allowed on the top 3 of each row. The red LED light will not act as an MSG indicator
Software prior to 6.1 T7316e -Handsfree button will not work, instead it will be the last key bottom right same as M7310. -Special LCD indicators on the bottom display will not work for the two rows of buttons -The red LED light will not act as an MSG indicator
Yes the T series works on my system as indicated, and Curleycord was right about the buttons, and I want to add something, fowarding calls from one extension to another is something that I am not able to complete. I have followed the directions to the "T" and nothing. I am wondering if my particular system has anything to do with that.