|
|
Joined: Nov 2019
Posts: 7
Member
|
OP
Member
Joined: Nov 2019
Posts: 7 |
The relay shorting test does not work. Do I need to do any programming? If I need, please point me to the right direction. Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2019
Posts: 7
Member
|
|
OP
Member
Joined: Nov 2019
Posts: 7 |
When I am in a door phone conversation, if press flash key, it does not short the relay. Please advise.
|
|
|
|
|
Joined: Apr 2005
Posts: 2,498 Likes: 2
Member
|
|
Member
Joined: Apr 2005
Posts: 2,498 Likes: 2 |
In the feature and specks manual you have to program the relay type, by default it is set as 0 (no relay). Once you set this you have to assign what door box will be activating it, by default it is set to 0 (not used)
We get old too soon, smart too late
|
|
|
|
|
Joined: Sep 2004
Posts: 4,194 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,194 Likes: 2 |
In the feature and specks manual you have to program the relay type, by default it is set as 0 (no relay). Once you set this you have to assign what door box will be activating it, by default it is set to 0 (not used) This! 10-61
|
|
|
|
|
Joined: Nov 2019
Posts: 7
Member
|
|
OP
Member
Joined: Nov 2019
Posts: 7 |
Thanks for the reply above. However, I still cannot make it working.
In programming section 10-61, I set relay type to "Door phone", and Destination Selection to "2" (my door phone is connected to the 2nd port)
In the RY1/2 port，I connect a multimetter to either pin 4,5 for relay 1, or pin 3,6 for relay 2 to test continuity. When I am in a door phone call, if I press "flash", it does NOT short the relay. Any idea on what else I am missing?
|
|
|
|
|
Joined: Sep 2004
Posts: 4,194 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,194 Likes: 2 |
No idea at this point. I would call NEC at this point if they are still supporting the 1100.
Last edited by Coral Tech; 11/20/19 08:15 PM.
|
|
|
|
|
Joined: Mar 2014
Posts: 365
Member
|
|
Member
Joined: Mar 2014
Posts: 365 |
If you are using the second port then 10-61 should be doorphone 2, destination 2. I'd use the third SLT port in the main KSU (DP 1) and set everything up for DP 1, destination 1. SLT ports 3/4 are used for the doorphone.
|
|
|
|
Forums84
Topics94,279
Posts638,738
Members49,763
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (wk6100),
86
guests, and
25
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
