|
|
Joined: Feb 2005
Posts: 12,343 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,343 Likes: 3 |
But the speakers ARE wired. I think your question is whether the IPO can be configured to page through an IP extension. How about something like this: http://valcom.com/Products/gateways.html-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Joined: Jul 2001
Posts: 3,342 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,342 Likes: 10 |
You need a way to get audio out of the IP Office and onto the network to be broadcast to the speakers.
So just like traditional paging, need a Paging interface that can take audio from a loop start trunk port, an analogue station port programmed as a paging port, an analog station port that rings, or an IP device that registers as an IP extension.
Once you have your audio, what is the speaker system that you are using? Bogen? Valcom? Viking? Algo? All of these system are going to have a Gateway that receives your audio and broadcasts it to the speakers. If you are using an IP extension, the gateway might be the same device as your paging interface.
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
2 members (dans, erniejoey),
135
guests, and
287
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|