|
Joined: Dec 2011
Posts: 28
Member
|
OP
Member
Joined: Dec 2011
Posts: 28 |
Can I switch it to the on position while the system is up and running and it will save?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Sep 2001
Posts: 2,329 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,329 Likes: 7 |
I don't think that will be an issue.The memory is already "saved" the backup is just for power failure condition.
|
|
|
|
Joined: Dec 2011
Posts: 28
Member
|
OP
Member
Joined: Dec 2011
Posts: 28 |
Had the same issue. Customer lost power to entire building and they lost all the programming again. Is there an issue with the Samsung IDCS100? What can I do to make sure this doesn't keep happening each time building loses power?
|
|
|
|
Joined: Sep 2001
Posts: 2,329 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,329 Likes: 7 |
It is probably a bad supercap on your mem card. Better than a battery, they can go bad.
|
|
|
|
Joined: Dec 2011
Posts: 28
Member
|
OP
Member
Joined: Dec 2011
Posts: 28 |
What is the easiest way to grab a backup after Im done re programming everything? How do you take that backup and upload if this happens again? This is like the 5th time Im re programming everything lol....
|
|
|
|
Joined: Sep 2001
Posts: 2,329 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,329 Likes: 7 |
As mentioned earlier in this thread you have a mem card , probably a mem3 right? You need a misc card installed and then you can assign 1 of the serial ports for connecting to with a pc and do a backup from there. So you also need a pc or laptop with a serial port or adaptor as well. You also need the Samsung software . Once you have all this it is easy to both do a backup of the programming and an upload if you lose it.
|
|
|
|
Joined: Dec 2011
Posts: 28
Member
|
OP
Member
Joined: Dec 2011
Posts: 28 |
Ill have to re check all the cards and slots when I go back and Ill take some pics so you can see what I see. Thank you
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Mem4 cards have an Ethernet port you can use with osm for programming. They also have flash memory, not eprom chips, so you can backup the programming to flash and then restore it if it loses memory.
|
|
|
Forums84
Topics94,262
Posts638,693
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Curlycord),
86
guests, and
248
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|