|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
I have an old CICS system with software version SP: 30DHCC04 NAT. It doesn't offer me the Feature Assignment in Telco Features, for caller ID. I suspect this version doesn't support caller ID? I did use a CI LSDS card.
Thanks. Jim
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
30DHC04
CICS 7.0 (SIP) STD, IRAD-ON, AA PROG PROMPTS (8X16/24)
This supports CLID Under Terms&Sets, not it's own heading.
Under Terms&Sets/Telco Features you should see these headings inside : Feature Assignment Caller Log Set Ext Mesg 1st Display Called ID Log Space
" I did use a CI LSDS card" It's one or the other,not both. So you have either: LSDS (no caller id) or a CI (Caller ID)
|
|
|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
Thanks again Curleycord. It has been quit a while since I did caller ID on one of these.
I used a CI card.
Thanks. Jim
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Curlycord),
183
guests, and
408
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|