| | Joined: Dec 2016 Posts: 6 Member | OP  Member Joined: Dec 2016 Posts: 6 | I would like to program a Toshiba CIX system to have the incoming line ring to to the all page. I see the door bell can be routed to the page when the night bell option is selected, but I don't see anything about the incoming line ring going to the page. | | | | | Joined: Jun 2005 Posts: 2,586 Likes: 1 Member | | Member Joined: Jun 2005 Posts: 2,586 Likes: 1 | I have only done this one time, because once you send a call to the paging system it won't go to voicemail. You should probably use a night key or schedule to turn on an Auto Attendant at night.
It has been a while, but if I remember correctly then you want to setup a page group with the external speakers, and then DIT dialing digits to the group paging code, ie.. #3101.
On some telephone paging amps they have a contact for a night ring. If you used DIT to night ring, then the relays on the processor with clost to trigger the ringing sound from the amp. | | | | | Joined: Dec 2016 Posts: 6 Member | | OP Member Joined: Dec 2016 Posts: 6 | Thank you, I'll give it a try. | | | | Forums93 Topics94,340 Posts639,394 Members49,444 | | Most Online5,661
May 23rd, 2018 | | |
25 members (nortelvoip, Mercenary Roadie, pvj, BobRobert, sundance, Yoda, justbill, mcemike, dukane123, Curlycord, dv8inpp, hitechcomm, mbhydro, Ruben, gelehu, Tip&Ring, hbiss, nonameyet, Jonce, Touch Tone Tommy, dexman, RATHER BE FISHING, jeffmoss26, Professor Shadow, ECI Tech),
163
guests, and
32
robots. | | Key: Admin,
Global Mod,
Mod | | |
|
