web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 4 of 4 1 2 3 4
Joined: Jan 2008
Posts: 195
Likes: 3
Member
Offline
Member
Joined: Jan 2008
Posts: 195
Likes: 3
Originally Posted by ABLE1
Originally Posted by cswroe
Check the COS at 20-13-46 for that SLT. That should be enabled to use the internal Conference Group. If those are all in COS 1 then that will also fix the MLT issue calling the Conference Group. I did not even know that was there until I looked in the manual trying to figure out why it is not working for you. Seems like the previous tech turned and disabled a lot of stuff.

The other way will work too, just more buttons to press.

As far as the DTMF, you could try re-doing the line calibration in 90-68-01tio to see if that helps. I am not sure what issue you are experiencing. There are some settings in 80-xx regarding that, I have never had to change from the default.



Ok, I checked 20-13-46 and the Remote Conference block is checked.

I looked for 90-68-01 but it does not exist. Typo??

As for the DTMF issue. It seems that the numbers entered into the Polycom is not what is transmitted.
At first I tried to dial out to my home number. I pressed the phone button (dial tone) 9 (dial tone) 717-XXX-XXXX
Received a recording saying that I need dial a 1 before the area code. So I tried again thinking that the local
CO area may need a 1 first. So I pressed the phone button (dial tone) 9 (dial tone) 1-717-XXX-XXXX
To my surprise the person on the line said. "9-1-1 Do you have an emergency??"
CRAP!!! Made my apologies and wished her a good day.

I had other issues from a busy, to dead air, etc. At one point I connected direct to a CO Line and dialed out
and it worked as it should. So as I said before it seems the DTMF on the SLT Port is out of sync or something.

It seems there are adjustments in 10-09 84-34 84-36 84-37 But, I feel that making any changes may
cause other bad things to happen. Don't want to go there!!!

Thanks for the any insight.

Les

Is it checked for the corresponding COS for that extension? It may not be in that first COS.

The manual has the default settings so may want to compare what is in that to the system. Seems like a small system, may download the programming, default the system, and see if all is well. If so, just reload what you need.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2013
Posts: 129
ABLE1 Offline OP
Member
OP Offline
Member
Joined: Jun 2013
Posts: 129
Just checked, all COS 01 to 15 blocks are checked in 20-13-46

Yes it is a small system. 4 CO's and 13 Digital Stations.

Page 4 of 4 1 2 3 4

Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,712 CTX100 install
186,796 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
2 members (hitechcomm, nortelvoip), 164 guests, and 240 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5