|
| Joined: Apr 2011 Posts: 12 Member | OP Member Joined: Apr 2011 Posts: 12 | Good Evening All,
I currently have a NS 700 with 4 CO lines but I’ve ran into a bit of a config issue.
1) Please remind me how to have a specific CO line ring to a single extension outside of using ICD 601 with all extensions in that group.
2) If after 5 rings to a specific extension via a CO Line the call would kick back to the main 101 extension.
And yes after installing many Panasonic units and not doing them every day you do forget the simple things.
Your help is greatly appreciated. | | | | Joined: Jan 2007 Posts: 2,102 Likes: 1 Admin | Admin Joined: Jan 2007 Posts: 2,102 Likes: 1 | Option 1
Dil table put the extension in for the line you want it to call and intercept extension to 101
Option 2
Dil table, line to a new group with the two extensions in it and delay ring 101 in the group
“I have not failed. I've just found 10,000 ways that won't work.”
| 1 member likes this:
EV607797 | | | | Joined: Apr 2011 Posts: 12 Member | OP Member Joined: Apr 2011 Posts: 12 | Good Morning OBT,
Thanks your a life saver.
Option 1 worked perfectly. | | | Forums84 Topics93,514 Posts635,324 Members49,566 | Most Online5,661 May 23rd, 2018 | | There are no members with birthdays on this day. | |
2 members (Curlycord, justbill),
29
guests, and
12
robots. | Key: Admin,
Global Mod,
Mod | | | |
|