|
|
|
|
Joined: Mar 2006
Posts: 58
Member
|
OP
Member
Joined: Mar 2006
Posts: 58 |
I am trying to replace a defective 5312 IP phone. I programmed the new MAC address in form 09 (desktop devices). When resetting the phone it goes through the startup process. I get an error message saying L2 & boot download error before the display shows SET IP 192.168.1.12 ICP 192.168.166.10.
All programming on this system is done via the serial connection using hyperterminal or Procomm.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2006
Posts: 58
Member
|
|
OP
Member
Joined: Mar 2006
Posts: 58 |
I found out that the phone had to be reset to factory default by holding the up volume control while phone reboots. A menu comes up where you can reset to default DHCP or program IP address if needed.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
