|
|
Joined: Aug 2020
Posts: 1
Member
|
OP
Member
Joined: Aug 2020
Posts: 1 |
I am having issues connecting to this system directly. I have Procomm set to Direct connect 9600 and I believe I have the cable wired correctly. I am getting only one screen about calls in progress but can't pull up the main config page. Nothing i press does anything but this screen. Is there anything else I need to do? This is a new cpu card so there is no programming on it yet. The cable I have only has 3 wires used. RJ45 pins 5, 6, and 4 go to db9 2,3,and 5 respectively.
Last edited by Henry VIII; 02/12/22 02:58 PM.
|
|
|
|
|
Joined: Nov 2004
Posts: 1,575 Likes: 1
Moderator-ESI - Executone
|
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,575 Likes: 1 |
what port are you plugged into? also, what emulation are you using? ( It's been a LONG time ago , the last time i messed with a " 84 " )
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 4
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 4 |
Sounds like you are on the Operator screen press Ctrl P to get to programming
|
|
1 member likes this:
nonameyet |
|
|
|
|
Joined: Nov 2004
Posts: 1,575 Likes: 1
Moderator-ESI - Executone
|
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,575 Likes: 1 |
Sounds like you are on the Operator screen press Ctrl P to get to programming Thats exactly what I was thinking.....about 2 hours After I responded
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
|
Joined: Dec 2008
Posts: 280
Member
|
|
Member
Joined: Dec 2008
Posts: 280 |
That should have gotten you into program mode.
If you want to stop that in the future go to B-Screen system
programming and there is an setting to turn that from a Y to N
Have a good one. Glad to see there are still some systems out there
as they were good for sure.
mjc
|
|
|
|
Forums84
Topics93,832
Posts636,781
Members49,647
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Gary S., eos90066),
74
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
