|
|
|
|
Joined: Apr 2010
Posts: 5
Member
|
|
Member
Joined: Apr 2010
Posts: 5 |
We have an older Axxess System (4.4-01) and yesterday I was trying to increase the baud rate for database programming and in the process, I enabled hardware flow control. Now I can't connect to the database.
I have the RS-232 port wiring pinouts and think I have the flow control set so it will always be open, asserted on Flow Control Input to Axxess with +8v on that line. I have tried other serial ports, baud rates from 1200 to 38400. It just won't respond after waiting for Asai Connection.
Can I access the database from our OS/2 voicemail PC or the SMDR port (which is working)? The database programming port is RS232-2 on a CPU128 card. I don't think we have TCP/IP on our Axxess system.
Any help will be greatly appreciated!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2001
Posts: 506
Member
|
|
Member
Joined: May 2001
Posts: 506 |
No IP untill 8.0. You could definately try another port, even the port on your OPC card might work if you have one. Try 9600 baud.
If none of those work for you and you know your cable/adapter are good, you might have to default the system and restore the DB... I've never been locked out of one though.
Devin
|
|
|
|
|
Joined: Apr 2010
Posts: 5
Member
|
|
Member
Joined: Apr 2010
Posts: 5 |
Thank you. As it turned out, I figured that answer out about 5 minutes before your post. I connected to the RS-232 port usually connected to the Axxessory Talk PC and it allowed me to change the settings for the port normally used for database access.
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (EV607797),
183
guests, and
63
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
