Phone Systems

Sponsored by Atcom
Get a free phone!
Previous Thread
Next Thread
Print Thread
Rate Thread
#643262 08/05/22 02:22 PM
Joined: Dec 2005
Posts: 649
Likes: 1
Member
OP Offline
Member
Joined: Dec 2005
Posts: 649
Likes: 1
Hey guys,
I have a client with a DK 424 with a c/d processor and 2 PRI's. They are switching carriers and going back to 1 PRI. I am a Vertical guy and have forgotten most of what I knew about Toshiba. Other than program 16, do I need to make any changes to *41 or *42 (if so, what?)? Are there any other programs I may not be thinking of? Thanks in advance.


"I thought I was wrong once, but I was mistaken"
Atcom VoIP Demo
Get a VoIP Demo Today
adteldon #643263 08/05/22 03:09 PM
Joined: Feb 2008
Posts: 23
Member
Offline
Member
Joined: Feb 2008
Posts: 23
If you are utilizing LCR, you will have to change your routing.

adteldon #643271 08/07/22 12:23 AM
Joined: Jun 2005
Posts: 2,636
Likes: 4
Member
Offline
Member
Joined: Jun 2005
Posts: 2,636
Likes: 4
First, a disclaimer: I have never programmed a PRI on a DK system, before. I started working with Toshiba on the Strata CTX line. I have worked on DK systems, but not one with a PRI.

Based on the DK manual, you do not want to change program 16. Prgm *41 appears to be for a T1 RDTU card, not a PRI RPTU. Prgm *42 applies to both cards.

I would think that if you disconnect one of the PRI cards, that the other one will automatically handle all incoming and outgoing calls. This is assuming that both PRIs are in the same trunk group in the system, and the didn't split the DIDs for some odd reason. I am not 100% sure if you can setup 2 PRIs into the same outgoing line group, but I am pretty sure that if one PRI is down, outgoing calls should route to the working PRI. This would also assume that both PRIs were setup for both incoming and outgoing calls.

I mean as a test you could unplug one of the PRIs before the cut and test all inbound and outbound calling. Just don't disconnect the one that is the primary clock source per prgm *42. This should be the card with a flashing LED.


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,629
Posts635,879
Members49,589
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Abcomm, n1cn0c, nicnoc, reataylor
Newest Members
TVCTech, joe angi, TommyKay, 電信小吳, Partswatch
49,589 Registered Users
Top Posters(30 Days)
dexman 10
Toner 8
Yoda 5
dans 5
Who's Online Now
1 members (BobRobert), 7 guests, and 10 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Best VoIP Phones | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5