|
Joined: Aug 2001
Posts: 1
Member
|
OP
Member
Joined: Aug 2001
Posts: 1 |
I do not want to route calls from the attendant to ext. 10 or 11 when the caller presses 0...can I assign a calling group to the 0...alternatively can I just assign a selector code to a calling group...I have tried the selector code and it only lets me assign it to one extension or "direct extension tranfer" (i.e., using selector code 9 it will not except 1, which defines my calling group 1)
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Use the extension number of the calling group(71-74) as you destination. You cannot redirect dial '0' calls, but on Partner ACS Rel 2.0 or higher you can assign cover buttons.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Like DrPbx say's. Put the phones you want into a huntgroup and assign your selector code to the first station in that hunt group.That should do it dtmf
Russ runs a local service and private tech center. [/url]
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|