EMP & Lightning Home Surge Protection
EMP - Click Here!
Global Test Supply
Linked Banner to your Product or Website
eCommerce website for sale!
Previous Thread
Next Thread
Print Thread
Rate Thread
#67989 10/07/01 03:06 PM
Joined: Oct 2001
Posts: 2
Member
OP Offline
Member
Joined: Oct 2001
Posts: 2
I am responsible for moving a Partner ACS to a new location. when I got to the new location, all the extentions are dead. There is not indicator light on the processor module, however there in an indicator light on the 308EC module.

We currently have no telco lines installed, however we expected the extentions to at least display or light up.

Also, the batteries were dead when the system was powered down.... and it was down for about 5 hours.


Anyone know of any issues to be concerned with regarding this type of move? Is the processor module toast?

Thanks.

Global Test Supply 728x90
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
Take the cards out and re seat them one at a time. when it powers up it will tell you to replace the batteries. If the batteries were dead when you powered down the system will go back to default. You will have to reprogram the system. If it was working fine before you moved it then it should work now.
Hope this helps
dtmf


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com]
Telrad Digital Programmer networked and standard kits available.
Commercial and Residential All Types Phone Service
Joined: Oct 2001
Posts: 2
Member
OP Offline
Member
Joined: Oct 2001
Posts: 2
That is exactly what I thought too. However, I get nothing on any handset.

If by cards, you mean the modules - processor & 308EC, I have tried removing them both and reseting them in the carrier. I also replaced the batteries.

I looked at the old wiring and it looks like the extentions are wired pair 1 and 2 standard 568A.

If I understand correctly, simply plugging an extention into the plug in the module should give me some indication on the extention display...again, there is nothing.

Are there replaceable components inside the porcessor module or doea the whole thing need to be replaced?


Thanks for your input. I'm in a tight spot and really appreciate your time!

Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
Well if you have taken them out and re seated them and still no light the next step is to take the middle card out (the Processor) take the power cord off the 5 slot cabinet and plug it into the card and see if it will work as a stand alone. Also if you have any PC cards in the processor take them out and see if it will fire up that will tell you what is bad ( the processor or the cabinet)
Hope this helps
dtmf
You can go to my profile and give me a call my info is all there.
When you find out what's bad you can get it by clicking on the Sundance logo on the top of this page.

[This message has been edited by dtmf (edited 10-08-2001).]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com]
Telrad Digital Programmer networked and standard kits available.
Commercial and Residential All Types Phone Service
Joined: Mar 2001
Posts: 320
Member
Offline
Member
Joined: Mar 2001
Posts: 320
if your processor module works alone, check the fuse in the 5-slot carrier.


| Telephone Systems | Voice / Data Cabling | phoning since 1979.

Link Copied to Clipboard
Advertising Sponsor
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,271
Posts634,039
Members49,492
Most Online5,661
May 23rd, 2018
Today's Birthdays
redneck
Newest Members
Mitel Hotel, Jonathan Renaud, dentnshell, Adam Suth, Roger Foisy
49,491 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 6
jsaad 3
MnDave 3
Advertising Sponsor Spot 2
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
17 members (justbill, hitechcomm, dukane123, BILL DEMMER, dexman, Pinecreekboy, Ruben, Touch Tone Tommy, KRRath, gelehu, Silversam, Butch Cassidy, BobRobert, MooreTel, mongo5150, OBT, EV607797), 432 guests, and 110 robots.
Key: Admin, Global Mod, Mod
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners
landing page builder Antiransomware 300x250 Your Business Phone Service in the Cloud