|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
OP
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Any body ever had slot #3 not work because of a bad proccesor? Changed cabinet and the 206's and what ever we do slot 3 will not come up. Thought it was a bad 206 but that is not the case.All cards will work in the 2nd slot but none will work in the 3rd slot.
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
I have only see it on the Endeavor and early ACS systems that were limited by the software. Can you swap the processor to find out?
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
OP
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Yea I've got a couple of spares in the shop, that's the next step on Monday. I've replaced everything else so that's about the last thing to do. Just thought maybe some has run into this before.
Russ runs a local service and private tech center. [/url]
|
|
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
131
guests, and
288
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
