atcomsystems.ca/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems loudspeaker paging

Has anyone interfaced a Bogen ZPM-3 with a paging amplifier D300 ampercenter.
Customer has a magix, a page pal 6 (to allow night ringing over speaker) and a D300 Ampercenter. Customer now wants to add zone paging (2 zones). I was contracted to install the ZPM-3 so they can page bldg 1 or bldg 2. Building 2 has a viking self amplifier speakers system.
The ZPM is working ok and the viking system is working ok thru the ZPM-3. I can not get the D300 ampercenter to work. Bogen faxed me the install sheet and I have it install per instructions.
Any help would be apprectiated. I can't figure out what I am overlooking, it should work.

You should be able to ditch the PagePal entirely, as the ZPM-3 has an input for a Tip/Ring "Night Line" for the ringing over paging.

Interface from the Magix paging trunk to the ZPM and configure as a loop start trunk. You may need a PRS-AS-A power supply to provide talk battery.

Configure as if you were using all self amplified speakers, except that for building 1, the output of the ZPA goes to the input of the amplicenter instead of the input of a self-amplified speaker.

You may need to jumper the contact-closure input on the amplicenter to keep it in the page-enable mode permanantly.