Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#73059 01/06/05 03:31 PM
Joined: Jan 2002
Posts: 462
Member
OP Offline
Member
Joined: Jan 2002
Posts: 462
Have a L7 with MLX 10D sets. All refub, the 10D sets keep going bad. Talked to my supplier and he has replaced the bad sets with 10DP he said that it was a bad batch. The new sets worked for about two months. Now the 10DP's are starting to go bad. (they just go dead, unplug and replug still n/g. Different cards in the KSU, take set right to the card in KSU still no good, replace with another set and it comes right up. Can't seem to pin down anything in the error codes. Any one have any ideas. I have been dealing with this supplier for a long time and never had any trouble. ???

Avaya IP Office Service in Canada
VoIP Demo

Avaya IP Office Service in Canada


Atcom provides quick and affordable service for your Avaya IP Office business phone system!
Our expert technicians have years of experience installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.
Proudly serving Canada from coast to coast.

#73060 01/06/05 06:02 PM
Joined: Apr 2002
Posts: 646
Member
Offline
Member
Joined: Apr 2002
Posts: 646
I had a bad power supply do the same thing.

#73061 01/06/05 07:25 PM
Joined: Apr 2004
Posts: 4,991
Member
*****
Offline
Member
*****
Joined: Apr 2004
Posts: 4,991
tony
see if they are replacing the flex board
when they refurb the set
if not you get a questionable set with a pretty face
ken

#73062 01/07/05 05:20 AM
Joined: Jan 2002
Posts: 462
Member
OP Offline
Member
Joined: Jan 2002
Posts: 462
Ken , just too many sets going belly up. I've been dealing with these people for a long time never had this kind of problem. Am going to replace power card and see if that works. Thanks to both of you for your input. Tony

#73063 01/07/05 06:30 AM
Joined: May 2003
Posts: 2,267
Member
Offline
Member
Joined: May 2003
Posts: 2,267
The DP sets do not have the "bad" flex circuits. They still sometimes go bad, but not like the older MLX or MLS flex circuits(for phones that we get in, about 50% of the older style need new flex circuits, with the DP sets, only about 1 in 50 need need replacements). There has to be something else going on to have that kind of failure rate.

------------------
Avaya Telephone Repair
Now Repairing Magix sets

[This message has been edited by paul144 (edited January 07, 2005).]


Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,960
Posts637,379
Members49,702
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Cuzz, Guardian777, philando, pmc, rpy55, Selma, volks20
Newest Members
jim gray III, Merenth, Service Tech 911, Stephen A, Pasg
49,702 Registered Users
Top Posters(30 Days)
Toner 12
vvbasti 10
dexman 5
Who's Online Now
2 members (Bushmills, jeffmoss26), 154 guests, and 36 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5