|
|
Joined: Sep 2003
Posts: 568
Member
|
OP
Member
Joined: Sep 2003
Posts: 568 |
Got a customer with an ACS R6 with 18D sets. Loud squeal starts when adding a line for conference. 1 - talking on first line; 2 - press Conf and dial second party; 3 - Press Conf to establish conference and loud squeal starts.
I have never seen this, but I suspect high loop current. A friend has borrowed my VOM so I couldn't test loop current, but have any of you encountered this before? I will return tomorrow with VOM.
Our most valuable products are our knowledge, experience and time.
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Yes it is comming from the lines, they make a 90A Attenuator that will cure it. You will need one for each line that has the problem.
|
|
|
|
|
Joined: Sep 2003
Posts: 568
Member
|
|
OP
Member
Joined: Sep 2003
Posts: 568 |
Could not locate any 90a attenuators, so I purchased some current regulators from Sandman. I am still getting the squeal when a conference is established. Lines have 40ma without regulators and 25ma with regulators. Otherwise, lines are clear.
Any more suggestions?
Our most valuable products are our knowledge, experience and time.
|
|
|
|
Forums84
Topics93,879
Posts637,002
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
99
guests, and
21
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg)