web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#74348 04/27/05 06:17 AM
Joined: Apr 2005
Posts: 20
Nilee Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 20
I'm having a problem renumbering an extension. I using the console phone to do the renumbering. I goto SysRenumber->Single->Extenstion->Old Extension->New Extension.... But when I enter the new extension, the system beeps, and prompts me for a new extension. I have been using an extension that isn't assigned to any physical line, and was able to perform this task numerous times before. However, this time it doesn't seem to be working. I've also tried using extension between 7100-7300, with the same result. The system that we have is a merlin magix R2.0

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

#74349 04/27/05 07:04 PM
Joined: Jul 2001
Posts: 3,342
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Offline
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,342
Likes: 10
The number you're trying to change the phone is already in use *somewhere* - could be a phone, an adjunct, a line, a park code, a calling group, most anything.

If you will do a "print" of your "dial plan", you might spot the conflict. If you're an experienced technician, and can go into the "monitor" mode, use the "locate" command. Once you find the conflict, renumber the offending conflict, and then you will be able to renumber your extension.

#74350 04/28/05 06:24 AM
Joined: Apr 2005
Posts: 20
Nilee Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 20
Tried printing out a dial plan, and I get an F2 Denied in the output file.

#74351 04/29/05 05:56 PM
Joined: Mar 2005
Posts: 14
Member
Offline
Member
Joined: Mar 2005
Posts: 14
I also am having a problem renumbering an extension on a system I just installed. Maybe someone can shed some light on this. I am pretty much using the default 2 digit numbering for then extensions and when I try to renumber IE ext 14 to 80 it beeps. I threw together another system and defaulted it also to mirror the other one and I found that if I keep the 2 digit extensions, I get an error trying to renumber, but if I default number it to 3 digits (starting at 100) I can renumber the extensions no problem. Is it possible to renumber a 2 digit system?

#74352 04/30/05 05:05 AM
Joined: Jul 2001
Posts: 3,342
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Offline
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,342
Likes: 10
Nilee, I don't know that you are seeing when you say you get "F2 Denied in the output file"

And for Normand Daoust, you have a conflict with your lines, being 801, 802, etc., when you try to change an extension to 80. Read the manual about dial plans, and see why putting the system in "Set-Up Space" gives you the most flexibility.

#74353 05/01/05 05:11 PM
Joined: Mar 2005
Posts: 14
Member
Offline
Member
Joined: Mar 2005
Posts: 14
Touch Tone Tommy, Thanks, I took a closer look at the various Numbering schemes and now see why I couldn't renumber the lines. With the 2 digit numbering I can only use a few areas to renumber to. I wanted to keep the same extension numbers as their old system, so I kept the 2 digit numbering instead of the 3 digit that I'm use to. I needed to move the the extension for the system programming position and could fine a temp number to do it. I even set up a second system at home to figure out what was up.

#74354 05/03/05 05:18 AM
Joined: Apr 2005
Posts: 20
Nilee Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 20
I figured out what the issue was. The 709 Extension was already assigned to a phone (by someone other than me). I had another extension that wasn't assigned to anywhere and used that to switch the other two extensions. Besides that, I'm still unable to figure out why I'm not able to use extension outside of the extension range (7100-7300) as I've seen mentioned before, to renumber extensions.


Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5