web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Dec 2006
Posts: 13
Member
OP Offline
Member
Joined: Dec 2006
Posts: 13
Power outage caused a partner ACS v. 3.0 to lose all its programming. (No battery backup frown )
Before the phone system was setup not to ring to any extension during the day except the secretaries desk. In night service mode, all the extensions should be able to ring. Went by the manual, setup all the extensions for outgoing access only on the lines during daymode. Put all the extensions in the Night service group and programmed the Night service button. When in night mode the phones are still not ringing and not allowed incoming access to incoming calls. Just wondering if theres anything I'm missing?

EDIT: Found the problem. Do not restrict the line access with #302. Go through Central Telephone Programming and change the line ringing at each ext. to No Ring.

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Joined: Aug 2002
Posts: 2,608
Moderator-ESI, Shoretel
***
Offline
Moderator-ESI, Shoretel
***
Joined: Aug 2002
Posts: 2,608
Check and see if auto backup was active or if there were any recent manual backups - if so you should have a recent backup and can just restore that. Otherwise undo everything you did associated with outgoing access (you're dealing with incoming calls) and program the phones using central telephone programming and set the extensions to no ring or delayed ring (in case the v-mail is busy or fails).

Joined: Apr 2004
Posts: 4,991
Member
*****
Offline
Member
*****
Joined: Apr 2004
Posts: 4,991
I would wonder why you did out going restriction
and if you did #302 change that to no restriction
and turn off the ringers on all sets but recp.

Then make your night service group to ring with night key activated.


also b4 doing this did you replace the batteries in the ACS ??

Joined: Dec 2006
Posts: 13
Member
OP Offline
Member
Joined: Dec 2006
Posts: 13
This switch does not have a VM, and yes the batteries were replaced. Thanks for the quick replies!


Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,712 CTX100 install
186,799 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
Who's Online Now
2 members (Toner, justbill), 168 guests, and 234 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5