web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Feb 2005
Posts: 54
Member
OP Offline
Member
Joined: Feb 2005
Posts: 54
'ello everyone.

Our Phone system here at the railroad (Partner ACS REV 6) suffered a "power event" and one of the ports in the middle of one of the remaining original 206 cards died. (RIP)

I have a 306 card on the shelf ready to go.

Does anyone have a SOP for how the ports rearrange when a 206 is replaced with a 308?

Will all the extensions stay the same, and now the "extra" port be at the end?

We have a Partner ACS rev 6, 308 processor card, and then have 4 206's hung off of it. The third 206 is the one that had the port get whacked.

My question is: Can I just replace the 206 with the 308 and have the processor keep the programming with the extensions, even though now two ports are shuffled off of the 4th card?

Hope this makes some sense.

Hows everybody doing?

Steve

AKA Trainwire

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Joined: Feb 2005
Posts: 12,342
Likes: 3
Member
***
Offline
Member
***
Joined: Feb 2005
Posts: 12,342
Likes: 3
Will all the extensions stay the same, and now the "extra" port be at the end?

It will if you put the 308 at the "end". What is the module arrangement now? Just one 206 and nothing else?

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
Joined: Jun 2006
Posts: 512
Member
Offline
Member
Joined: Jun 2006
Posts: 512
label all line and extension cables on 3rd and 4th 206 cards,turn off power,unplug labeled cables,remove 3rd 206 card and replace with 4th 206 card ,then install 308card last postion and plug all labeled cables back in,power up and test.All settings and extensions should remain same.Do you have backup and restore card on system?If not when was last time batteries were replaced on ACS?I should have mentioned backup and batteries before saying power down system.

Joined: Feb 2005
Posts: 12,342
Likes: 3
Member
***
Offline
Member
***
Joined: Feb 2005
Posts: 12,342
Likes: 3
Oops, didn't see where you gave the configuration. I agree with jacktel, pull the bad 206, move the remaining over and put the new 308 in the last slot.

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
Joined: Feb 2005
Posts: 54
Member
OP Offline
Member
Joined: Feb 2005
Posts: 54
Hi Hal, Howya been?

I haven't looked at the backup batteries lately, to be honest. It does have a backup card installed and configured to auto backup.

The rearranging thing is what I needed to know.

I'll let you know how it works out.

My latest project.

https://rypn.sunserver.com/forum/vi...tdays=0&postorder=asc&highlight=

Steve

"never underestimate the perversity of an inanimate object"

Joined: Dec 2005
Posts: 9,162
Likes: 8
Spam Hunter
*****
Offline
Spam Hunter
*****
Joined: Dec 2005
Posts: 9,162
Likes: 8
Nice! If you aquire a Bigboy, I'd like to see some nice pictures of that mammoth! laugh :thumb:


I Love FEATURE 00
Joined: Feb 2005
Posts: 54
Member
OP Offline
Member
Joined: Feb 2005
Posts: 54
The problem with that locomotive is that it would roll the rails over in the first corner it came to!

They are really cool though.

TW

Joined: Jun 2006
Posts: 512
Member
Offline
Member
Joined: Jun 2006
Posts: 512
When did you start on railcar restore? you mention paint in 2002.Great looking job.----John

Joined: Feb 2005
Posts: 54
Member
OP Offline
Member
Joined: Feb 2005
Posts: 54
Rolled into the shop at the beginning of Feb, 07.


TW

Joined: Feb 2005
Posts: 54
Member
OP Offline
Member
Joined: Feb 2005
Posts: 54
Thank you, things are back up and running normally, or as normally as things get around here anyway.

TW


Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
2 members (justbill, Toner), 132 guests, and 243 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5