|
|
|
|
Joined: Feb 2005
Posts: 54
Member
|
OP
Member
Joined: Feb 2005
Posts: 54 |
What am I missing?
According to the book I have, if an incoming line has caller ID, then it should transfer to a system phone right?
Well it's not. Even with a display phone plugged directly into the port on the system. I am missing something, but a read of the book is no help.
Partner ACS Rev 6.
Anybody think of something?
Thanks
Steve Spangler
AKA trainwire
|
|
|
|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
The phone has to ring. Also, the CID info is transmitted after the second CO ring so if you have an AA pick up before that you won't get it.
I assume that you have confirmed that CID is being sent on the line from the telco.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Feb 2005
Posts: 54
Member
|
|
OP
Member
Joined: Feb 2005
Posts: 54 |
Hmm,
I made the ASSumption that because the owner of the line said it ID'd, that it actually ID'd.
I think I'll go check.
thanks
TW
|
|
|
|
Forums84
Topics94,285
Posts638,781
Members49,766
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
93
guests, and
180
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
