Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
R7 and VS Mail R5 Problem
#86245 09/08/07 05:43 AM
Joined: Nov 2006
Posts: 701
Member
OP Offline
Member
Joined: Nov 2006
Posts: 701
HI!Techs , i have just tried to put a VS Mail R5 on a partner R7, it was tested on an ACS R3 at my office, and seemed find , the Voicemail is a 4POrt , assigned the vm ports and all worked find, I went to install it on R7 acs , i put in 5 slot cabinet and put modules back in , i put the cpu center , extention module in 1st slot to the left, and the vs mail in 2nd slot to left, i assigned the extention ports in 505 hunt grp. 7 , i tried calling the ports the 1st won didn't answer i believe it rang and voicemail didn't answer, The other 3 vm ports 2,3 and 4 were answered by vm system, before i could do any programing Line 1 rang and was answered with transfering to Reception, SO i have one port not working and the Voicemail system answering , with above mention prompt, now i did put a night service button on x 10 and maybe causing part of the problem, i will have to do more reading to get use to this system, its my 1st won, when i took VM system out and hooked back at office it was worked finf.??? Any suggestions!!.OH how do i default voicemail and erase old Greetings??You can email me.

Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
Re: R7 and VS Mail R5 Problem
#86246 09/08/07 07:06 AM
Joined: Oct 2004
Posts: 812
Member
Offline
Member
Joined: Oct 2004
Posts: 812
If there is a 206 in the first slot you need to increase your VM ports by one 27,28,29,30.

If it is a 308 in slot one you need to increase it by three.

Re: R7 and VS Mail R5 Problem
#86247 09/08/07 09:02 AM
Joined: Feb 2005
Posts: 12,254
Member
***
Online Content
Member
***
Joined: Feb 2005
Posts: 12,254
OH how do i default voicemail and erase old Greetings??You can email me.

Do you know the admin password?

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
Re: R7 and VS Mail R5 Problem
#86248 09/08/07 11:31 AM
Joined: Nov 2006
Posts: 701
Member
OP Offline
Member
Joined: Nov 2006
Posts: 701
HI Hbiss, yes the admin is still set to default.Thanks

Re: R7 and VS Mail R5 Problem
#86249 09/08/07 11:51 AM
Joined: Nov 2006
Posts: 701
Member
OP Offline
Member
Joined: Nov 2006
Posts: 701
OKay let me see if i have this straight, if i have 5x7 r7 in centre slot and 308 in 1st left slot vm r5 in 2nd slot my vm exts. are 33,34,35,36??? IS this right and should the vm be in a more effective slot for future expansion.Thanks

Re: R7 and VS Mail R5 Problem
#86250 09/08/07 12:35 PM
Joined: Oct 2004
Posts: 812
Member
Offline
Member
Joined: Oct 2004
Posts: 812
29,30,31,32

Re: R7 and VS Mail R5 Problem
#86251 09/08/07 12:47 PM
Joined: Oct 2004
Posts: 812
Member
Offline
Member
Joined: Oct 2004
Posts: 812
The VM has to go into slot 2.

If you add another card then move the voice mail at that future time and change hunt group 505.

Re: R7 and VS Mail R5 Problem
#86252 09/08/07 05:52 PM
Joined: Feb 2005
Posts: 12,254
Member
***
Online Content
Member
***
Joined: Feb 2005
Posts: 12,254
HI Hbiss, yes the admin is still set to default.Thanks

The documentation for your system is available on the Avaya site. I suggest you download and read through it. It will answer all of the questions you have asked here.

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
Re: R7 and VS Mail R5 Problem
#86253 09/08/07 06:28 PM
Joined: Nov 2006
Posts: 701
Member
OP Offline
Member
Joined: Nov 2006
Posts: 701
THANKS Hal and S.S. appreciate your suggestions, i will try this install again next week, i have already enter the admin programming and defaulted the vm. Thanks Again.


Link Copied to Clipboard
Forum Search
Most Recent 5 Post
Toshiba CIX night bell audio thu paging
by sjs1 - 09/23/20 07:08 PM
adaptor cables
by Bushmills - 09/23/20 06:47 PM
NVM 2000 VS Voice Support
by teldata1 - 09/23/20 11:11 AM
SVMi 16E card
by Hofman telekom - 09/23/20 11:05 AM
Harris TS44 Buttset keys 4, 5, and 6 not working
by Mercenary Roadie - 09/22/20 03:34 AM
Who's Online Now
30 members (Bob3470, Ruben, Daniel, Yoda, LenShustek, justbill, nameless, Iwatsu Guru, sjs1, Bushmills, Carl Navarro, nortelvoip, hbiss, Touch Tone Tommy, jknichols, msnell, KRRath, RobertTBS, bencahill, SamsungCat, ALB300, RonP, sjw827, jab1780, Hofman telekom, metelcom, Gary S., teldata1, STS E, Skunky), 542 guests, and 73 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,962
Posts637,281
Members49,350
Most Online5,661
May 23rd, 2018
Today's Birthdays
B & B Communications, commo23, mikedphones
Newest Members
katbutters, crazy88, Ray Mar, NKol423, Rob McKay
49349 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 35
hbiss 13
teleco 12
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners