|
Joined: Mar 2008
Posts: 250
Member
|
OP
Member
Joined: Mar 2008
Posts: 250 |
This is going to drive me nuts, and it's a short trip! I've got a ACS rel 4, with partner mail, cabinet is full. Extension 30 is blinking on the console and other phones where it is programmed as a dss button. The phone works, it just causes the dss button to blink. We have replace the 308 card, changed the phone, the jack and the wiring. It goes away when we change things, but starts blinking in about 2 days. Last step is to change the processor but I'm resisting.
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
what happens when you plug directly into the processor
I would use a phone from a working extension (not the one currently on this extension)
if it still does it default the processor and reprogram before you replace it
I would also try swapping extractions , make 30 15 and 15 30 for a few days and see if it stays with the location or station port
Skip ------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
Joined: Feb 2005
Posts: 12,342 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,342 Likes: 3 |
You wouldn't happen to have x30 programmed as a fax extension in #601 would you? That's the only thing I can think of that might make the DSS button for that extension blink and I'm not even sure that would do it.
Before I did anything else I would default the system and program from scratch.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Joined: Dec 2007
Posts: 175
Member
|
Member
Joined: Dec 2007
Posts: 175 |
You might be onto something Hal. I think if you call a fax extension and it doesn't answer, it flashes the DSS to say "Hey I'm outta paper!"
|
|
|
|
Joined: Mar 2008
Posts: 250
Member
|
OP
Member
Joined: Mar 2008
Posts: 250 |
Hal you are too much! That was it, set as fax extension!!!!!!!! what a pain, no one in the office will admit to programming as a fax, we NEVER use that feature.
|
|
|
Forums84
Topics94,262
Posts638,693
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
115
guests, and
233
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|