|
|
|
|
Joined: Jul 2006
Posts: 53
Member
|
OP
Member
Joined: Jul 2006
Posts: 53 |
Hello all. I was sent to a customer with a merlin 2 system. I haven't worked on this system in years. I was able to figure out how to remove the lines from pool 9. But, I couldn't figure out how to assign specific lines to specific extensions. Not sure if it's me or not but the programming manual is not very helpful.
The customer had a power outage and lost some programming. I suggested they upgrade to a legend r7 processor. But, they are a state run facility so you know how that goes.
Can someone give me the steps I would need to assign the lines?
Thanks,
Brian
|
|
|
|
|
Joined: Oct 2004
Posts: 240
Member
|
|
Member
Joined: Oct 2004
Posts: 240 |
Admin T/P to P
Conference twice
Touch Adm Tel, light steady
dial intercom #, or touch auto intercom button ( 2 beep OK )
touch appropriate line button
green light on ( line assigned )
|
|
|
|
|
Joined: Jul 2006
Posts: 53
Member
|
|
OP
Member
Joined: Jul 2006
Posts: 53 |
Thanks for the info. They still have not sent back to this site. But, it's good to have the info anyway.
Brian
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
