atcomsystems.ca/forum Forums Thread Like Summary - T59 Stapler/Staples

Back in May when Verizon swapped out my ONT as a part of a service upgrade, the technician used T59 staples to secure the power supply's cables as well as the RG6Q on the backboard. The brand of stapler & staples is ACME

I realize that stapling cables tends to be frowned upon, but, the staples seem to do a good job keeping cables in place, but allowing cables/wires to slide back & forth without any problems.

I went to Lowes and purchased a T59 stapler and a small supply of the staples. I did some test staples of scrap RG6Q and everything seemed fine.

Just wondering if anyone else had used these staples and how did things go

I had one and it never worked right it would keep jamming up and have to squeeze the handle several times to get one staple. When it worked right it held the cables fine.