Continuation of Permissions for the Installers Category Ver 7.

To get permission for the installers category please complete the following.
1.Fill out all the information in your user profile.
2.Post in here that you would like permission.
3.We need to be able to verify your an Installer/Owner or you will need 25 posts to be considered.
4. Please read the Announcements in the forum once you have permission.
Thank You
Admin.

I would like permission to enter the installers forum. I am owner of an interconnect company. Thanks, Jim


[This message has been edited by jimthomson (edited September 08, 2005).]

jimthomson

Please authorize me to enter the installer forum. Thank you

tmorin
please read the first post.
Your information doesn't allow us to verfy who you are.
anyone can get a yahoo email address.

I would like permission to access installers forum. I filled out everything that I could on my profile.

mwann, you have not met the requirements yet.

You need to answer the 50 question quiz and also post a pic of your first install.

You also need to say the color code forward and backwards. You also need to explain how you punch down a 25 pair cable and why you do it that way.

We need a list of Radio stations in your area that often cause RF problems with your systems.

All kidding aside
You have to be verfied or you need to have at least 25 post to even be considered to join the elite Installers forum!


------------------
BIGDOG3c


PARALLEL TECHNOLOGIES INC.

WWW.ABUGSEYEVIEW.COM

[This message has been edited by BIGDOG3c (edited September 13, 2005).]

OK, well I finished the quiz.

Posting a picture of my first install will be hard, when we cut over to dial the wreck out crew took everything.

Said the color code forward/backward, twice. Punching down a 25 pair cable using a punch down tool, and when I asked the guy that showed me how the first time and asked why, he said "because that's the way we do it".

Radio stations in the area, they are all AM band (but you probably already knew that FM doesn't cause us the problems).

The last one about 25+ posts, I'm working on it. I think this makes 8 or 9.

Thanks for detailing what I needed to do, I appreciate you taking the time and your responses.

with the information you have in your profile, you could be anyone, if you don't have a web site with an email that matches that site your going to need 25 posts, unless your company phone # shows up in google.

Permission please.

twisted pair

test-ok,

Nice handle, years ago we nick named one of the guys in our work group "test ok". No disrespect intended of course.

Anyway,

quote:
--------------------------------------------------------------------------------
3.We need to be able to verify your an Installer/Owner or you will need 25 posts to be considered.
--------------------------------------------------------------------------------

with the information you have in your profile, you could be anyone, if you don't have a web site with an email that matches that site your going to need 25 posts, unless your company phone # shows up in google.

Thanks for your reply, I understand I am lacking a web site with an email that matches, and the company phone #. So, I'll be patient and stick around, do the 25 posts, and ask for permission, again.

You probably already know by my email address who I work for anyway.

#11

Hello again. I understand the point regarding Yahoo email. Respectfully asking again for permission to enter the installer's forum. Thank you

mwann
tmorin

Can I have access please?

djweis

Permission to join the installers forum please.

theDoctor

I would also like to be upgraded to "installer"
Where on my profile page do I make such a request?

BrianS

errr just what goes on in there? I dont know if I would want to be a member of any club that would have me as a member! Can I at least check it out? Our website keeps crashing but I do have a legit email.

poolfool
you also have 29 posts.

Request permission for the installer's forum, please.

jsaxe

Requesting access to Installer's Forum.

Thanks.

------------------
Life would be easier if I had the source code.

MacGyver

I would like to gain access to the installers board. I am a Installation tech/rmats handleing the southeast region for my company

ALEX KROGER
In your profiles you need the www. in your url to make it work.

I would like entrance to the installers forum.

cjvio

Knock Knock ?

Requesting permission for the Installer's Forum

telephoneguy & telcomtex

test

I think its time i had access to the secret socitey installer forum.

rustynails

Requesting permission...

I would also like to request approval for entrance into the Installer's Forum.

Ring, Ring.. anybody there? Can I get permission to join?

khathcock...please see the first post.


nonameyet

?