atcomsystems.ca/forum
Posted By: mgi66 PA without PBX - 09/17/04 04:42 PM
I am going to install a BOGEN for paging in a warehouse and office. The problem I have is that customer uses only Centrex lines no PBX system there. I am planning to use one of the Centrex lines with an auto answer telephone. Wiring speaker on that phone and connecting it to the PA should do the trick

I would like to have your feedback on this setup.
Will it work?
What kind of analog phone should I use?
Did I miss any thing?

Thanks
Posted By: JJ Re: PA without PBX - 09/17/04 04:58 PM
I believe Viking makes such a device. Bogen might also make one.

Good Luck!!
Posted By: Toner Re: PA without PBX - 09/17/04 05:15 PM
You might want to have Telus restrict incoming calls from outside the group for that line. We've had instances with a similar setup where people dial the number by accident and say "Hello?, hello?" etc.
Posted By: justbill Re: PA without PBX - 09/17/04 05:23 PM
There used to be paging systems you could connect a phone line to for this purpose. Haven't seen one in awhile, but I bet they still make um.
Bill
Posted By: Touch Tone Tommy Re: PA without PBX - 09/17/04 06:36 PM
Valcom V-9940 is designed for this purpose. Power supply sold seperatly. Just did one the other day.
Posted By: mgi66 Re: PA without PBX - 09/20/04 09:52 AM
Thanks for the help, I appreciate it.
© Sundance Business VOIP Telephone Help