Does anyone know which PBX/KSU would be
compatible with D/4 dialogic board?

I have the D/4 installed in a PC autodialing
numbers.
The idea is to connect this autodialer to
KSU or PBX that would allow it to make a
direct call, and when the D/4 detects that someone picked up on the far end, it would
transfer the call to the station with
live agent connected to the KSU. Does anyone
know which KSU models would do the job?

Any advice is greatly appreciated.
Thanks!
Ilya



[This message has been edited by Predictive (edited January 27, 2005).]

I think the d/4 cards are simply analog ports. I think you should be able to connect via analog ports on about any system and achieve this. You should be using the PBX/KSU to dial through though so the PC can transfer the calls to people on the system.

Great!
That makes shopping a lot easier
Thanks a lot!

The Network interface is 4 PSTN interfaces. Signaling options are Analog loop start, DTMF, MF.

Here's a link to the datasheet and Quick install guide if you want more info:

Data Sheet
https://www.tsinc.com/assets/intel/D4PCI_Datasheet.pdf
Quick Install Card
https://www.tsinc.com/assets/intel/D4PCI_Quick_Install_Card.pdf


------------------
Stephen Joyce, Terminal Solutions, Inc. www.tsinc.com sjoyce@tsinc.com
Business Telephone Systems Sales &a...ntage, Lucent/Avaya, Sprint Protege)[/i]