Is there a built-in CDR port on the TelRad Digital Key DX system? Is there any other equipment I need (besides a printer) to get a CDR data dump?
Your printer can be connected to a COL, CHL, COG or RS232 card. Then its all programming.
I would suggest that you get a tech for this unless you are very familiar on the programming side.
Or you can go in with your programmer and access the System Utilities and get it but you will have to know what your doing in there as you can really screw up the system programming.
Hope this helps
dtmf
[This message has been edited by sundance (edited 10-17-2001).]