Does anyone know the key sequence to DND fwd to a Sys Spd? Set 9+ext # in Spd Dial table, set DID routing to ring handset (BA1). Can't get the DND sequence correct. Thought it was Feat 35, 773 , Spd #. Many thanks Andy
Andy it should be feat 35 2(all) sys sp dial bin.
Client told me it doesn't work. It's an old PCP, UK sb506 (not sure of US equiv) but release just after ISDN compatibility. Feat 35, 2 call fails. Andy
It definitely can forward to an external number over PRI. Someone else had set it up, but I scrubbed the divert in error. The forwarded number is in the sys spd list, just can't remember the key sequence! Prog DND then sys spd number? Am also not on site so am relying on the Client. Cheers Andy
From your post it looks like release 5.xx and SSPhone's string is the way to set it up.
Make sure you have the line access in the sys sp dial. If dial 9 LCR use 9 xxxyyyy or use trunk or trunk group acces code.
------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit?
Telrad Programmer Kits
Sorted it out. Feat 35 2 Prog/Spd XXX. Thanks as always Andy.