atcomsystems.ca/forum
Posted By: kcdusty cordless/wireless solution - 04/26/05 12:34 PM
We are searching for a solution to the following: Is there a product we can use in conjunction with our Telrad system that would let the operator move around the office with some sort of wireless headset, but still be able to transfer multiple lines to all extensions? There are products available to answer the phone by wireless, but not transfer the line. Any suggestions?
Posted By: SSPhone Re: cordless/wireless solution - 04/26/05 02:22 PM
Just How far is the Recpt moving away?
Here is a link for the Telrad 3040 wireless solution.
https://www.telradconnegy.com/3040.htm

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits
Posted By: tony3866 Re: cordless/wireless solution - 04/27/05 05:28 AM
The best soultion would be what SSphones said but that phones is expensive and you need to be Avanti sets E2E but it might work on sb7. I not sure on what version.

You might look into a single line card or the single line add-on module (if you have avanti phones) It will work with any single line phone that you provide and it can do almost all the features that the telrad phone can do.

------------------
Need cable or other voice/data hardware? Here's your link. Telephone Supplies
Posted By: SSPhone Re: cordless/wireless solution - 04/27/05 06:59 AM
Tony
The operator would have a tough time with a single line device.

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits
Posted By: tony3866 Re: cordless/wireless solution - 04/27/05 10:02 AM
Just as SSphones said, It is a hard to use. But it just takes a little time getting use to. If you have a high call volume DON'T use this application.

------------------
Need cable or other voice/data hardware? Here's your link. Telephone Supplies
© Sundance Phone System Forums - VOIP & Cloud Phone Help