It seems that changing memory keys in this revision is somehow different. When I highlight a memory key under programmable keys, it doesn't give me an option to view or change memory key contents. Can anyone give me any ideas on how to do this?
You have to set up maps and it should let you change them with no problem per map.
Go to Station Features then to Programming Keys to make your maps then you can assign your stations to the map you want.
No you have to change the memory keys on the phones
feat program the button then the ext you want it to call.
SB207 :rofl:
O damn that's right, my bad,,, it's been a long time sense I have even seen one that old lol
From the SB manual:
To dial with a MEMORY button
• Press the programmed button.
To program a MEMORY button
1. Press [FEAT].
2. Press [SPD/PROG].
3. Press the MEMORY button to be programmed.
4. Dial the desired extension number (up to four digits)
or
Press [FEAT] and then dial the desired feature code.
See the Feature Codes table at the end of this guide.
5. Press [SPKR].