DTMF not work on Analog station - 06/28/04 03:58 PM
I have hooked up a FAX machine on an analog line and it does not dial out. I tried with a standard phone instrument and hear dial tone but it does not break when I push DTMF keys.
This system was installed 18 months ago by another agency. Then this summer our agency bought the building, including the DK424i phone system. I do not see any indication that they used the analog lines before, but the system has the RSTU and the BRCS4 board plugged onto the PCB in the second slot.
Since I do not have spare boards, how can I determine that the BRCS4 board is working? I have checked program 03 and the slot 000 is set to 91 and the 001 is set to 92.
That seems to be what would make it operate.
This system was installed 18 months ago by another agency. Then this summer our agency bought the building, including the DK424i phone system. I do not see any indication that they used the analog lines before, but the system has the RSTU and the BRCS4 board plugged onto the PCB in the second slot.
Since I do not have spare boards, how can I determine that the BRCS4 board is working? I have checked program 03 and the slot 000 is set to 91 and the 001 is set to 92.
That seems to be what would make it operate.