When you use mailbox 999 to reset a VM password, what does it get reset to?

Also, I'm trying to use the r3admin to do some other changes but keep getting

Unable to get right status while initialize the modem.

The cabling looks correct and I think I am using the correct password.

Thanks
dave

You have mail

I am having the same problem, stratagy with unknow password, please help.
[email protected]

You have mail.

Man Dan your up and Adam early the morning.

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits

CTX100 what is the automatic VM password, how do i reset one, and what would it reset to

[email protected]
THANKS

Do not post passwords on the board.

[This message has been edited by SSPhone (edited October 14, 2004).]

Sorry I didn't know... email me for more info.

I am also looking for the same information -- when I reset the pw on a Stratagy Flash , what does it reset to ??

Thank you.

jp

JP - e-mail me....password information is not discusses on the open forum.....

Dan

I think it would be ok to show default passwords on forums. Just not BACKDOOR ones.

What do think?

I don't agree. Besides it is the policy of the board.

hobart
Not sure if you a tech,end user or business owner but lets look at your question. If you are a end user/business owner and one of your past (or present) employees were to post a request for a default password or any password and got it they could wipe out the system and/or voicemail. Thats why we take it off the board and verify you are who you say you are.
On another note can I have your password for your bank account?
Also see https://www.sundance-communications...amp;End=2460311&Session=2453446.0512 for more info.

...looks like this path is well travelled. Any chance someone could email me the result of the user id password reset via mailbox 999 as well? All I remember from the course I took years ago on the Stratagy was I hope it isn't built like the Stratagy Box was and what a bizarre default password to arrive at. Haven't they heard of 4 zeros or nines or something?

Doc
complete your profile for email.
or call one of the Moderators for phone support.

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits

sent you mail SSPhone...

------------------

You got mail

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits

Could You email this info to me also??
Thanks

Now you got mail

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits

Hello,
I've just taken over a DK424 system with an IVP8 installed. I can create users but do not know what the base password is.
Would it be possible for me to get an e-mail with the default password.
Thanks
Dave

DAVE - Please complete your profile. We kind of need to know who you really are!!!

------------------
fingerlakestelecom.net

I have updated my homepage and Intrestes. I do not have an ICQ number.

A computer consultant with no e-mail address???? And you want a response by e-mail???
Whats wrong with this picture......Hmmmm


[This message has been edited by Voyager (edited March 27, 2005).]

No, I had selected not to publish my address to the general public for Anti_spam purpose. The Moderators and administrator was checked to allow to e-mail.
I have now changed this setting so My information is now totally public.

I have a Toshiba CTX100 with the Strategy IVP8 voicemail. If anyone could email me passwords for both, it would be greatly appreciated. The unit was set up for a different area of the country and there is much I need to change.

Thanks

Hello,
I've just taken over a DK424 system with an IVP8 installed also, i do not know what the password is..i tried the deafult ( or atleast the default that the manual says ) with no luck...can anyone help me please??

I too have just taken over a Stratagy voicemail that I don't know the host account password for. I do have the login and password for several admin accounts. Is it possible to reset the host account from one of those? I didn't see it. Mail me, please!


Edit: It is not the default.

[This message has been edited by MadImmortalMan (edited June 10, 2005).]

You can call Toshiba corp. and they can reset the voice mail to default, after they verify that you are the owner or authorized by the owner to do so. Toshiba likes to have their own certified tech do any programing but realizes that end users like to have and need to have control over their own equipment

I too have just taken over a Flash system and am unable to connect to anything. my software just keeps reporting that it is "Unable to get right status while initialize the modem." So i can't make any changes that way, then i try to do the #999 thing the passwords I have don't work.

any one have any ideas on how to work this problem??

Make sure that you have a null modem cable.

IVP8's are easy. they have a flash memory.
the STRATAGY's are a little harder.
with the IVP8 shut it down properly.
take out the flash card on the vmail.
Put itin a flash card reader on your laptop
-then go into the stratagy directory
there is a file in there that acts like the autoexec.bat- it is basically the system configuration file in Text format.
--open it up and just scroll down to password '??????'

then close everything reinstall the flash card and restart vmail and your in business.

The default mailbox pass codes is always
extension number _ _ _+_ _ _ a certain number that is minus 2 from the administrators mailbox.

I am trying to configure a Stratagy 4 port vm. I am installing this for a customer that doesn't know the password. I tried the default password and no dice. Could someone email me directions on using the backdoor password? Thank you

I would check the baud rate of your com port to make sure that you are running the same speed as you modem in the Stratagy. If you figure it out let me know because I am getting the same thing on my machine. I am able to get further by remoting into the Stratagy. I am using Win XP Pro.

Can anyone help me or am I wasting time?

petersog

I sent you an email...

Similar questions..

Stratagy "in-skin". I am able to access all admin boxes through the phone, but PC program passwords are a mystery. Connecting is no problem, but I'm drawing a blank on the default password or process to backdoor in.

Hammer

[This message has been edited by Hammerdown (edited September 13, 2005).]

Hello... Anyone there? Still need some help, please.

Hammer

To bad we dont get paid to sit and watch the board to answer questions.

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits
How about some Camo? DUCKCAMO.com

[This message has been edited by SSPhone (edited September 15, 2005).]

Before anyone else opens the year old post and ask for a Password. STOP

WE DO NOT POST PASSWORDS ON THE BOARD.

Also see https://www.sundance-communications...amp;End=2460311&Session=2453446.0512 for more info.

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits
How about some Camo? DUCKCAMO.com

I know the rules, and I'm not asking for anything to be posted publicly. Can anyone send me a personal message, please!

Hammer