there a 2 sets of speed dial one being system speed dial that everyone shares and station speed dial that is personal to a phone which do you need and what model control unit do you have the set you referenced works on several systems
The phones all run through a strata system.One person told me to leave the phone on hook and press the # key and then the button that you want to program.then put in the the number you want and press # key but this does not work it goes to conf. page
captain again which system ,toshiba has several systems all called strata if you want speed dial buttons on 1-8 where are your outside lines to have a button designated for a speed dial # the button must be assigned in system programming then loaded with your #
what i want to do is on the side you have lines 1 thru 8 I want to program each line for a different ext. number like I pick up the phone and hit line 1 and it rings at ext. 651
do you have a programming book on board if you do its program #39 doing this on port 005 in the system if hit icm #402 it will show the ext and port of the phone you need to do this on port 005 with a display set
That system is called a CTX-670. If fact, you have multiple cabinets because that model # is an expansion cabinet, not the main (CHSUB672A). If those buttons are already assign a fuction by the installer, then you can not change them. They can be changed by the user if they are programmed as One Touch Keys.